Printing data directly from the USB flash memory drive

Connect your USB flash memory drive to the USB direct interface (1) on the front of the machine.

When the machine has recognised the USB flash memory drive, the Direct LED turns blue.

Press the Direct key.

Direct Print

1.FILE0_1.PDF

2.FILE0_2.PDF

3.FILE0_3.PDF

Select

or OK

Press

to choose the folder name or file name you want to print.

Press OK.

If you have chosen the folder name, press

to choose the file name you want to print.

Press OK.

Note

•	If you want to print an index of the files, choose Index Print, and then press OK. Press Mono Start or Colour Start to print the data.
•	File names containing more than 8 characters will appear on the LCD as the first 6 characters of the file name followed by a tilde mark (~) and a number. For example, ”HOLIDAY2007.JPG” would appear as ”HOLIDA~1.JPG”.
•	Only the following characters can be displayed on the LCD :A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9 $ % ’ ` - @ { } ~ ! # ( ) & _ ^

Do one of the following:

•	Press or to choose a setting you need to change and press OK, and then press or to choose an option for the setting and press OK.

•

If you do not need to change the current default setting, go to 5.

Note

•

You can choose the following settings:

•

Depending on the file type, some of these settings may not appear.

Pres s Mono Start or Colour Start if you have finished.

Press the numeric keys key to enter the number of copies you want.

Press OK.

Direct Print

FILE0_1.PDF

No. of Copies:

Press Start 1

Press Mono Start or Colour Start to print the data.

Press Stop/Exit.

CAUTION

	To prevent damage to your machine, DO NOT connect any device other than a digital camera or USB flash memory drive to the USB direct interface.
	DO NOT remove the USB flash memory drive from the USB direct interface until the machine has finished printing.

Note

•	If you want to change the paper tray to feed paper from, press Menu, 1, 6, 2 to change the paper tray setting.
•	You can change the default settings for direct print by using the control panel when the machine is not in the direct print mode. Press Menu, 4 to enter the USB Direct I/F menu. (See Menu table.)