Copy options

You can change the copy settings from the default display. The LCD shows:

1.	No of Copies You can enter the number of copies you want by pressing + or - repeatedly.

Press

to scroll through the copy options menu.

•	Quality (See Changing copy speed and quality.)
•	Enlarge/Reduce (See Enlarging or reducing the image copied.)
•	Paper Type (See Paper Type.)
•	Paper Size (See Paper Size.)
•	Brightness (See Brightness.)
•	Contrast (See Contrast.)
•	Color Adjust (See Colour Saturation.)
•	Stack/Sort (DCP-540CN only) (See Sorting copies using the ADF (DCP-540CN only).)
•	Page Layout (See Making N in 1 copies or a poster (page layout) .)
•	Set New Default (See Setting your changes as a new default.)
•	Factory Reset (See Restoring all settings to the factory settings.)

When the option you want is highlighted, press OK.

You can change the copy settings temporarily for the next copy.

The machine returns to its default settings after 60 seconds.

If you have finished choosing settings, press Mono Start or Colour Start.

If you want to choose more settings, press

Note

You can save some of the settings that you use most often by setting them as default. These settings will stay until you change them again. (See Setting your changes as a new default.)

Changing copy speed and quality

You can choose the copy quality. The factory setting is Normal.

Fast	Fast copy speed and lowest amount of ink used. Use this setting to save time (documents to be proof read, large documents or many copies).
Normal	Recommended setting for ordinary print outs. Good copy quality with adequate copy speed.
Best	Use this setting to copy precise images such as photographs. The highest resolution and slowest speed.

1	Load your document.
2	Enter the number of copies you want.
3	Press or to choose Quality. Press OK.
4	Press or to choose Fast, Normal or Best. Press OK.
5	If you do not want to change additional settings, press Mono Start or Colour Start.

Page Top