When you choose Scan to OCR, your document will be scanned and sent directly to the computer you designated on your network. The ControlCenter software will launch the ScanSoft™ PaperPort™ 11SE with OCR software or Presto! PageManager and convert your document into text that can be viewed and edited from a word processing application on the designated computer.
| 1 | Load your document. |
| 2 | Press  ( Scan). |
| 3 | Press  or  to choose Scan to OCR. Press OK. |
| 4 | Press or to choose the destination computer you want to send to. Press OK. If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination computer on the control panel. Press OK.  Note | | For DCP models, press or repeatedly to enter the first digit of the PIN number. Press OK or  to move the cursor, then use or to enter the second digit. Repeat until you have entered all four digits of the PIN number. |
|
| 5 | Press Mono Start or Colour Start. The machine starts the scanning process. |
Note
| • | Scan type depends on the settings of the Device Button tab, Mono Start or Colour Start do not change the settings. |
|
|
| |
