Search

Site Map

Scan Photos and Graphics

Send scanned photos or graphics directly to your computer.
image

  • To scan from your machine:

    • You must select your machine using Brother iPrint&Scan.

    • Use Brother iPrint&Scan to change scan settings, such as the file type and file storage location.

    For more information, see Related Information: Change the Scan Button Settings from Brother iPrint&Scan.

  • To scan from your computer:

    See Related Information: Scan Using Brother iPrint&Scan (Windows/Mac).

  1. Load your document.
  2. Press [Scan]>[to PC]>[to Image].
  3. If the machine is connected over the network, select the computer name where you want to send data.
    image

    If the LCD prompts you to enter a PIN for the computer, enter the four-digit PIN on the LCD, and then press [OK].

  4. To change the settings, press image[Options], and then select the scan settings you want to change. If you use the default settings, skip this step.
    image
    Available options may differ depending on your model and settings.
    • [2-sided Scan]
    • [Scan Settings]
    • [Colour Setting]
    • [Resolution]
    • [File Type]
    • [Document Size]
    • [Brightness]
    • [Contrast]
    • [Auto Deskew]
    • [Skip Blank Page]
    • [Skip Blank Page Sensitivity]
    • [Remove Background Colour]
    • [Margin Settings]
    • [Moire Reduction]
    • [Colour/Grey TIFF Compress]
    • [B&W TIFF Compress]
    image

    • To change scan settings, a computer with the Brother iPrint&Scan software installed must be connected to your machine.

    • If your machine displays the [OK] button, press [OK].

    • To save the settings as a shortcut, press [Save as Shortcut].

  5. Press [Start].
    The machine starts scanning. If using the machine's scanner glass, follow the touchscreen instructions to complete the scanning job.
Related Information
Did you find the information you needed?

find moreaccept