Search

Site Map

Add Shortcuts

You can add the Fax, Copy, Scan, Web Connect and Apps settings you use most frequently by saving them as your Shortcuts. Later you can press the Shortcut to apply these settings instead of manually re-entering them.
image

Some Shortcut menus are not available depending on your model.

These instructions describe how to add a Copy Shortcut. The steps for adding a Fax, Scan, Web Connect, or Apps Shortcut are very similar.

DCP-L5510DW/MFC-L5710DN/MFC-L5710DW/MFC-L5715DN

  1. Press image [Shortcuts]. (If image [Shortcuts] is displayed.)
  2. Press a tab.
    image
    Swipe to display the tab if needed.
  3. Press any image to add a new Shortcut.
  4. Press [Copy].
  5. Press the copy preset you want.
  6. Press image[Options].
  7. Swipe up or down or press image or image to display the available settings, and then press the setting you want to change.
  8. Swipe up or down or press image or image to display the available options for the setting, and then press the option you want.
    Repeat these two steps until you have selected all the settings and options you want.
  9. When you have finished changing settings, press [OK]. (If the [OK] button is displayed.)
  10. Press [OK].
  11. Read and confirm the displayed list of settings you have selected, and then press [OK].
  12. Enter a name for the Shortcut using the LCD, and then press [OK].

MFC-L6710DW/MFC-L6910DN/MFC-L6915DN/MFC-EX910

  1. Press image [Shortcuts]. (If image [Shortcuts] is displayed.)
  2. Press a tab.
    image
    Swipe to display the tab if needed.
  3. Press any image to add a new Shortcut.
  4. Press [Copy].
  5. Press > to access the preset copy settings.
  6. Swipe up or down or press image or image to display the copy presets, and then press the copy preset you want.
  7. Press [Options].
  8. Swipe up or down or press image or image to display the available settings, and then press the setting you want to change.
  9. Swipe up or down or press image or image to display the available options for the setting, and then press the option you want.
    Repeat these two steps until you have selected all the settings and options you want.
  10. When you have finished changing settings, press [OK]. (If the [OK] button is displayed.)
  11. Press [Save as Shortcut].
  12. Read and confirm the displayed list of settings you have selected, and then press [OK].
  13. Enter a name for the Shortcut using the LCD, and then press [OK].
Related Information
Did you find the information you needed?

find moreaccept