Date & Time

-

Access the Date and Time setting menus.

Toner

Toner Life

View the approximate remaining toner life.

Test Print

Print a test page.

Toner Cartridge Check

View the installed toner cartridge information on the LCD, for example, if the toner cartridge is genuine.

Network

Wired LAN

Access the Wired LAN setting menus.

WLAN(Wi-Fi)

(For wireless network models)

Access the WLAN setting menus.

Wi-Fi Direct

(For wireless network models)

-

Access the Wi-Fi Direct setting menus.

Tray Setting

-

Access the tray setting menus.

Eco Mode

-

Access the Eco Mode setting menu.

All Settings

-

Configure the detailed settings.

Tray Setting

Paper Type

MP Tray

-

Select the paper type that matches the paper in the MP tray.

Tray 1

-

Select the paper type that matches the paper in the standard paper tray.

Tray 2  *1

-

Select the paper type that matches the paper in the Optional Tray (Tray 2).

Tray 3 *1

-

Select the paper type that matches the paper in the Optional Tray (Tray 3).

Paper Size

MP Tray

-

Select the paper size you loaded in the MP tray.

Tray 1

-

Select the paper size you loaded in the standard paper tray.

Tray 2 *1

-

Select the paper size you loaded in the Optional Tray (Tray 2).

Tray 3 *1

-

Select the paper size you loaded in the Optional Tray (Tray 3).

Tray Use: Copy

-

-

Select the tray you want to use for making a Copy.

Tray Use: Print

-

-

Select the tray you want to use to Print.

Print Position

MP Tray

X Offset

Adjust the print start position (usually at the upper left corner of a page) for the paper you loaded in the MP tray horizontally from -500 (left) to +500 (right) dots when printing at 300 dpi.

Y Offset

Adjust the print start position (usually at the upper left corner of a page) for the paper you loaded in the MP tray vertically from -500 (up) to +500 (down) dots when printing at 300 dpi.

Tray 1

X Offset

Adjust the print start position (usually at the upper left corner of a page) for the paper you loaded in the standard paper tray horizontally from -500 (left) to +500 (right) dots when printing at 300 dpi.

Y Offset

Adjust the print start position (usually at the upper left corner of a page) for the paper you loaded in the standard paper tray vertically from -500 (up) to +500 (down) dots when printing at 300 dpi.

Tray 2 *1

X Offset

Adjust the print start position (usually at the upper left corner of a page) for the paper you loaded in the Optional tray (Tray 2) horizontally from -500 (left) to +500 (right) dots when printing at 300 dpi.

Y Offset

Adjust the print start position (usually at the upper left corner of a page) for the paper you loaded in the Optional tray (Tray 2) vertically from -500 (up) to +500 (down) dots when printing at 300 dpi.

Tray 3 *1

X Offset

Adjust the print start position (usually at the upper left corner of a page) for the paper you loaded in the Optional tray (Tray 3) horizontally from -500 (left) to +500 (right) dots when printing at 300 dpi.

Y Offset

Adjust the print start position (usually at the upper left corner of a page) for the paper you loaded in the Optional tray (Tray 3) vertically from -500 (up) to +500 (down) dots when printing at 300 dpi.

Skip Tray *1

-

-

Select a specific tray to skip if you know it is loaded with the wrong size paper.

Separator Tray *1

-

-

Select the tray that contains the paper used as the separator paper, which is inserted between each print job.

Check Paper

-

-

Select whether or not to display a message indicating you must check the paper type and paper size.

Beep

-

-

-

Adjust the beeper volume.

LCD Settings

Backlight

-

-

Adjust the brightness of the LCD backlight.

Dim Timer

-

-

Set how long the LCD backlight stays on after returning to the Home screen.

Screen Settings

Home Screen

-

-

Set the Main Home screen.

Scan Screen

-

-

Set the default Scan screen.

Display Information

IP Address

-

Select whether to display your machine's IP Address on the Home screen.

Notice Settings

Scan Result(Skip Blank Page)

-

-

Displays the total scanned pages and skipped pages after scanning is completed.

Ecology

Eco Mode

-

-

Turn the following machine settings on at the same time:

• 2-sided Print: Long Edge *2

• Sleep Time: 0 Min

• Dim Timer: 10 Secs

• Quiet Mode: On *2

• Toner Save: On *2

Toner Save

-

-

Increase the page yield of the toner cartridge.

Sleep Time

-

-

Set how much time should pass before the machine enters Power Saving mode.

Quiet Mode

-

-

Decrease printing noise.

Auto Power Off

-

-

Set the number of hours that the machine will remain in Deep Sleep mode before going into Power Off mode.

Improve Output

-

-

-

Enable the Reduce Curl feature or the Toner Fixing feature to improve print output.

Setting Lock

Set Password

-

-

Restrict unauthorised users from changing the machine’s settings.

Lock Off⇒On

-

-

Delete Storage

Macro ID

-

-

Delete the registered Macro data.

Stream ID

-

-

Delete the registered Stream data.

Font ID

-

-

Delete the registered Font data.

Delete All

-

-

Restore your machine's Macro/Stream and Font data to the factory settings.

(Select a shortcut button)

Rename

Change the shortcut name.

Edit

Change the shortcut settings.

Delete

Delete the shortcut.

Register Card/NFC

Assign a shortcut to an ID card.

Delete Card/NFC

Remove a shortcut from an ID card.

Emulation

-

-

Select the emulation mode.

Resolution

-

-

Select a print resolution.

Density

-

-

Increase or decrease the print density.

Print Settings

-

-

Set your print settings to Text or Graphics.

Print Options

Font List

HP LaserJet

Print a list of the machine’s internal fonts.

BR-Script 3

Test Print

-

Print a test page.

2-sided

2-sided Print

-

Enable or disable 2-sided printing and choose long edge or short edge.

Single Image

-

For a print job where the last page is a 1-sided image, select the 1-sided Feed option to reduce printing time.

When you use Letterhead or Preprinted paper, you must select the 2-sided Feed option. If you select 1-sided Feed for Letterhead or Preprinted paper, the last page will be printed on the reverse side.

Auto Continue

-

-

Select this setting if you want the machine to clear paper size errors or media type errors, and use paper from other trays.

Paper Type

-

-

Set the paper type.

Paper Size

-

-

Set the paper size.

Copies

-

-

Set the number of printed pages.

Orientation

-

-

Set pages to print in either portrait or landscape orientation.

Print Position

-

-

Access the Print Position setting menus.

Auto FF

-

-

Allow the machine to print any remaining data automatically.

HP LaserJet

Font No.

Font No.

Set the font number.

Soft Font No.

Set the soft font number.

This menu appears if a soft font is installed on your Brother machine.

Font Pitch

-

Set the font pitch.

(Available only for certain fonts.)

Font Point

-

Set the font size.

(Available only for certain fonts.)

Symbol Set

-

Select the symbol or character set.

Table Print

-

Print the code table.

Auto LF

-

ON: CR -> CR+LF, OFF: CR -> CR

Auto CR

-

ON: LF -> LF+CR, FF -> FF+CR, or VT -> VT+CR

OFF: LF -> LF, FF -> FF, or VT -> VT

Auto WRAP

-

Select whether you want a line feed and carriage return when the carriage position reaches the right margin.

Auto SKIP

-

Select whether you want a line feed and carriage return when the carriage position reaches the bottom margin.

Left Margin

-

Set the left margin at column 0 to 70 columns at 1 cpi.

Right Margin

-

Set the right margin at column 10 to 80 columns at 1 cpi.

Top Margin

-

Set the top margin distance from the top edge of the paper.

Bottom Margin

-

Set the bottom margin distance from the bottom edge of the paper.

Lines

-

Set the number of lines on each page.

Tray Command

-

Select this setting if a tray mismatch appears when you use the HP drivers.

Epson FX-850

Font No.

Font No.

Set the font number.

Soft Font No.

Set the soft font number.

This menu appears if a soft font is installed on your Brother machine.

Font Pitch

-

Set the font pitch.

(Available only for certain fonts.)

Font Point

-

Set the font size.

(Available only for certain fonts.)

Character Set

-

Select the symbol or character set.

Table Print

-

Print the code table.

If Change Emulation appears on the LCD, choose the option you want.

Auto LF

-

ON: CR -> CR+LF, OFF: CR -> CR

Auto Mask

-

Set the top and bottom margins to two-line each. When you set Auto Mask to On, this setting overrides the Top Margin and Bottom Margin settings.

Left Margin

-

Set the left margin at column 0 to 70 columns at 1 cpi.

Right Margin

-

Set the right margin at column 10 to 80 columns at 1 cpi.

Top Margin

-

Set the top margin distance from the top edge of the paper.

Bottom Margin

-

Set the bottom margin distance from the bottom edge of the paper.

Lines

-

Set the number of lines on each page.

IBM Proprinter

Font No.

Font No.

Set the font number.

Soft Font No.

Set the soft font number.

This menu appears if a soft font is installed on your Brother machine.

Font Pitch

-

Set the font pitch.

(Available only for certain fonts.)

Font Point

-

Set the font size.

(Available only for certain fonts.)

Character Set

-

Select the symbol or character set.

Table Print

-

Print the code table.

If Change Emulation appears on the LCD, choose the option you want.

Auto LF

-

ON: CR -> CR+LF, OFF: CR -> CR

Auto CR

-

ON: LF -> LF+CR, FF -> FF+CR, or VT -> VT+CR

OFF: LF -> LF, FF -> FF, or VT -> VT

Auto Mask

-

Set the top and bottom margins to two-line each. When you set Auto Mask to On, this setting overrides the Top Margin and Bottom Margin settings.

Left Margin

-

Set the left margin at column 0 to 70 columns at 1 cpi.

Right Margin

-

Set the right margin at column 10 to 80 columns at 1 cpi.

Top Margin

-

Set the top margin distance from the top edge of the paper.

Bottom Margin

-

Set the bottom margin distance from the bottom edge of the paper.

Lines

-

Set the number of lines on each page.

BR-Script 3

Error Print

-

Choose whether the machine prints the error information when errors occur.

PDF

Multiple Page

-

Set the page layout when printing multiple pages.

PDF Print Options

-

Set the PDF Print setting to print either comments (Markup) or stamps in the PDF file, along with the text.

PDF Fit to Page

-

Select if the machine scales or resizes the pages in the PDF file to fit the selected paper size.

Carbon Menu

Carbon Copy

-

Enable or disable the Carbon Copy function.

Copies

-

Set the number of printed pages.

Copy1 Tray

-

Select the tray you use for Copy1.

Copy1 Macro

-

Select a macro/stream for Copy1.

Copy2 Tray... Copy8 Tray

-

Select the tray you use for Copy2 to Copy8.

Copy2 Macro... Copy8 Macro

-

Select a macro/stream for Copy2 to Copy8.

Reset Printer

-

-

Restore the machine settings to the factory settings.

Wired LAN

TCP/IP

Boot Method

IP Boot Tries

Select the Boot method that best suits your needs.

IP Address

-

Enter the IP address.

Subnet Mask

-

Enter the Subnet mask.

Gateway

-

Enter the Gateway address.

Node Name

-

Enter the Node name.

(Up to 32 characters)

WINS Configuration

-

Select the WINS configuration mode.

WINS Server

Primary

Specify the IP address of the primary WINS server.

Secondary

Specify the IP address of the secondary WINS server.

DNS Server

Primary

Specify the IP address of the primary DNS server.

Secondary

Specify the IP address of the secondary DNS server.

APIPA

-

Set the machine to allocate the IP address from the link-local address range automatically.

IPv6

-

Turn the IPv6 protocol on or off.

Ethernet

-

-

Select the Ethernet link mode.

Wired Status

-

-

View the current wired status.

MAC Address

-

-

View the machine's MAC address.

Set to Default

-

-

Restore the wired network settings to the factory settings.

Wired Enable

-

-

Turn the Wired LAN interface on or off manually.

WLAN(Wi-Fi)

Find Wi-Fi Network

-

-

Configure your wireless network settings manually.

TCP/IP

Boot Method

IP Boot Tries

Select the Boot method that best suits your needs.

IP Address

-

Enter the IP address.

Subnet Mask

-

Enter the Subnet mask.

Gateway

-

Enter the Gateway address.

Node Name

-

Enter the Node name.

(Up to 32 characters)

WINS Configuration

-

Select the WINS configuration mode.

WINS Server

Primary

Specify the IP address of the primary WINS server.

Secondary

Specify the IP address of the secondary WINS server.

DNS Server

Primary

Specify the IP address of the primary DNS server.

Secondary

Specify the IP address of the secondary DNS server.

APIPA

-

Set the machine to allocate the IP address from the link-local address range automatically.

IPv6

-

Turn the IPv6 protocol on or off.

WPS/Push Button

-

-

Configure your wireless network settings using the one-button push method.

WPS/PIN Code

-

-

Configure your wireless network settings using WPS with a PIN.

WLAN Status

Status

-

View the current wireless network status.

Signal

-

View the current wireless network signal strength.

SSID

-

View the current SSID.

Comm. Mode

-

View the current Communication mode.

MAC Address

-

-

View the machine's MAC address.

Set to Default

-

-

Restore the wireless network settings to the factory settings.

WLAN Enable

-

-

Turns the wireless interface on or off.

Wi-Fi Direct

Manual

-

-

Configure your Wi-Fi Direct network settings manually.

Group Owner

-

-

Set your machine as the Group Owner.

Push Button

-

-

Configure your Wi-Fi Direct network settings using the one-button push method.

PIN Code

-

-

Configure your Wi-Fi Direct network settings using WPS with a PIN code.

Device Information

Device Name

-

View your machine's device name.

SSID

-

View the Group Owner's SSID.

When the machine is not connected, the LCD displays Not Connected.

IP Address

-

View your machine's current IP Address.

Status Information

Status

-

View the current Wi-Fi Direct network status.

Signal

-

View the current Wi-Fi Direct network signal strength.

When your machine acts as Group Owner, the LCD always indicates a strong signal.

I/F Enable

-

-

Turn the Wi-Fi Direct connection on or off.

E-mail

Mail Address

-

-

Enter the email address.

(Up to 255 characters)

Setup Server

SMTP

Server

Enter the SMTP server name and address.

Port

Enter the SMTP port number.

Auth. for SMTP

Select the Security method for email notification.

SSL/TLS

Send or receive an email via an email server that requires secure SSL/TLS communication.

Verify Cert.

Verify the SMTP Server Certificate automatically.

Setup Mail TX

Sender Subject

-

View the subject.

Size Limit

Size Limit

Limit the size of email documents.

Maximum Size(MB)

Notification

-

Send notification messages.

Web Connect Settings

Proxy Settings

Proxy Connection

-

Change the Web connection settings.

Address

-

Port

-

User Name

-

Password

-

Web Based Mgmt

-

-

-

Enable or disable Web Based Management.

If you enable this function, make sure you specify the connection method to use Web Based Management.

IPsec

-

-

-

IPsec is an optional security feature of the IP protocol that provides authentication and encryption services. We recommend contacting your network administrator before changing this setting.

Global Detect

Allow Detect

-

-

Enable or disable Global Detect, a function that detects and notifies the user when the user unintentionally connects to a global network.

Reject Access

-

-

Disable connections to the global network.

Network Reset

-

-

-

Restore all network settings back to the factory settings.

Address Book

-

Print a list of names and numbers stored in the Address Book.

User Settings

-

Print a list of your User settings.

Printer Settings

-

Print a list of your Printer settings.

Network Configuration

-

Print a list of your Network settings.

Print File List

-

Print a list of data saved in the machine's memory.

Drum Dot Print

-

Print the Drum Dot Check Sheet.

WLAN Report

(For wireless network models)

-

Print the wireless LAN connection results.

Serial No.

-

Check your machine's serial number.

Firmware Version

Main Version

Check your machine's firmware version.

Security Version

Firmware Update

-

Update your machine to the latest firmware.

Firmware Auto Check

-

View firmware information on the Main Home screen.

Page Counter

Total

Check the total number of pages the machine has printed.

Copy

Print

Other

Parts Life  *1

Drum

Display the remaining life of the drum unit.

Fuser

Display the remaining life of the fuser unit.

Laser Unit

Display the remaining life of the laser unit.

PF Kit MP

Display the remaining life of PF Kit MP.

PF Kit 1

Display the remaining life of PF Kit 1.

PF Kit 2 *2

Display the remaining life of PF Kit 2.

PF Kit 3 *2

Display the remaining life of PF Kit 3.

Date & Time

Date

Add the date and time on the screen.

Time

Clock Type

Select the time format (12-hour or 24-hour).

Auto Daylight

Set the machine to change automatically for Daylight Saving Time.

Time Zone

Set your time zone.

Reset

Machine Reset

Restore all the machine settings that you have changed.

Network Reset

Restore all network settings back to the factory settings.

Address Book

Erase all stored email addresses.

All Settings

Restore all the machine's settings back to the factory settings.

Factory Reset

Restore all settings back to the factory settings.

Local Language

(Available only for certain countries)

-

Change your LCD language.