Search

Set the Continue Mode

The Continue Mode forces the machine to continue printing after the control panel displays Replace Toner.

The machine will continue printing until the LCD displays Toner Ended.

The factory setting is Stop.

image
  • When the control panel indicates an error, you cannot change the mode.
  • If you continue printing in the Continue Mode, we cannot guarantee the print quality.
  • While using Continue Mode the print may appear faint.
  • After replacing the toner cartridge with a new one, the Continue Mode will go back to the default setting (Stop).

HL-L2390DW/DCP-L2550DW/MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW

  1. Press Menu.
  2. Press image or image to display the [General Setup] option, and then press OK.
  3. Press image or image to display the [Replace Toner] option, and then press OK.
  4. Press image or image to display the [Continue] or [Stop] option, and then press OK.
  5. Press Stop/Exit.

HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL

  1. Press image[Settings]>[All Settings]>[General Setup]>[Replace Toner].
  2. Press [Continue] or [Stop].
  3. Press image.
Did you find the information you needed?