Search

Set Your Station ID

Related Models:MFC‑L2690DW / MFC‑L2690DWXL / MFC‑L2710DW / MFC‑L2717DW / MFC‑L2730DW / MFC‑L2750DW / MFC‑L2750DWXL
Set the machine to print your Station ID and the fax's date and time at the top of each fax you send.

MFC-L2690DW/MFC-L2690DWXL/MFC-L2710DW/MFC-L2717DW

  1. Press image (FAX).
  2. Press Menu.
  3. Press image or image to display the [Initial Setup] option, and then press OK.
  4. Press image or image to display the [Station ID] option, and then press OK.
  5. Enter your fax number (up to 20 digits) using the dial pad, and then press OK.
  6. Enter your telephone number (up to 20 digits) using the dial pad, and then press OK.
    If your telephone number and fax number are the same, enter the same number again.
  7. Use the dial pad to enter your name (up to 20 characters), and then press OK.
    image
    • To enter text on your machine, see Related Information: How to Enter Text on Your Brother Machine.

  8. Press Stop/Exit.
    NOTE
    (USA only) The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or electronic device to send any message via a telephone fax machine unless such messages clearly contain, in a margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity or other individual sending the message and the telephone number of the sending machine or such business, other entity or individual. To program this information into your machine, see Set the date and time and Set your Station ID.

MFC-L2730DW/MFC-L2750DW/MFC-L2750DWXL

  1. Press image[Settings]>[All Settings]>[Initial Setup]>[Station ID]>[Fax].
  2. Enter your fax number (up to 20 digits) using the LCD, and then press [OK].
  3. Press [Tel].
  4. Enter your telephone number (up to 20 digits) using the LCD, and then press [OK].
  5. Press [Name].
  6. Enter your name (up to 20 characters) using the LCD, and then press [OK].
    image
    • Press image to cycle between letters, numbers and special characters. (The characters available may differ depending on your country.)
    • If you enter an incorrect character, press image or image to move the cursor to it and press image. Press the correct character.
    • To enter a space, press [Space].
    • For more detailed information, see Related Information.
  7. Press image.
    NOTE
    (USA only) The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or electronic device to send any message via a telephone fax machine unless such messages clearly contain, in a margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date and time it is sent and an identification of the business or other entity or other individual sending the message and the telephone number of the sending machine or such business, other entity or individual. To program this information into your machine, see Set the date and time and Set your Station ID.
Did you find the information you needed?