Broadcasting lets you send the same fax message to more than one fax number. You can include Groups, One Touch, Speed Dial numbers and up to 50 manually dialled numbers in the same broadcast.
You can broadcast up to 258 different numbers. This will depend on how many groups, access codes or credit card numbers you have stored, and on how many delayed or stored faxes in memory.
Note
| | Use  ( Address Book) to help you choose numbers easily. |
| 1 | Make sure you are in Fax mode  . |
| 2 | Load your document. |
| 3 | Enter a number. Press OK. You can use either a One Touch, Speed Dial, a Group number, or a number manually entered using the dial pad. (See How to dial.) |
| 4 | Repeat step 3 until you have entered all the fax numbers you want to broadcast to. |
| 5 | Press Mono Start. |
After the broadcast is finished the machine will print a broadcast report to let you know the results.
Note
| | The scan profile of the One Touch, Speed Dial or Group number you chose first will be applied to the broadcast. |
Cancelling a Broadcast in progress
| 1 | Press Menu, 2, 7. The LCD will show the Broadcast job number followed by the fax number (or name) being dialed (for example, #001 0123456789). |
| 2 | Press OK. The LCD will show the following message: #001 0123456789  1.Clear 2.Exit |
|
| 3 | Press 1 to cancel the fax number being dialed. The LCD will then show the following message: Broadcast#001 1.Clear 2.Exit |
|
| 4 | To cancel the Broadcast, press 1. |
| 5 | Press Stop/Exit. |
