For more information about Secure Function Lock 2.0, see Chapter 11 of the Network User’s Guide on the CD-ROM we have supplied.
1 | Make sure that your camera is turned off. Connect your camera to the USB direct interface (1) on the front of the printer using a suitable USB cable. |
2 | Turn on the camera. Make sure your camera is in PictBridge mode. When the machine has recognized the camera, the LCD shows the following message. Access Denied |
|
3 | Press or to choose ID. Press OK. |
4 | Enter the password. Press OK. Change ID PIN:XXXX |
Note | If your ID has restricted options, the following messages appear on the LCD. Message | Meaning | Access Denied | Printing documents directly from a camera to the Brother machine is restricted. | Limit Exceeded | The number of pages you are allowed to print is exceeded. The print job will be cancelled. | Mono Print Only | Printing color documents is restricted. | Not Available | Printing pictures directly from a camera to the Brother machine is restricted. |
|
|
5 | The LCD shows the following message depending on which mode the machine is in: 04/20 15:30 Fax Camera Connected |
Camera Connected |
Stack Copies:01 Camera Connected |
|
6 | Set your camera to print an image. Set the number of copies if you are asked. When the machine starts printing an image, the LCD will show the following message: PictBridge Printing. Kee... |
|
Note
| Please refer to the documentation supplied with your camera for detailed operations how to print using PictBridge. |
IMPORTANT
| DO NOT remove the digital camera from the USB direct interface until the printer has finished printing. |