Printing images

Make sure that your camera is turned off. Connect your camera to the USB direct interface (1) on the front of the machine using a suitable USB cable.

Turn on the camera. Make sure your camera is in PictBridge mode.

When the machine has recognized the camera, the LCD shows the following message depending on which mode the machine is in:

04/20 15:30 Fax

Camera Connected

Scan:Select

Camera Connected

Stack Copies:01

Camera Connected

Set your camera to print an image. Set the number of copies if you are asked.

When the machine starts printing an image, the LCD shows the following message:

PictBridge

Printing. Kee...

Note

Please refer to the documentation supplied with your camera for detailed operations how to print using PictBridge.

IMPORTANT

•	To prevent damage to your machine, do not connect any device other than a digital camera or USB flash memory drive to the USB direct interface.
•	DO NOT remove the digital camera from the USB direct interface until the machine has finished printing.

DPOF printing

DPOF stands for Digital Print Order Format.

Major digital camera manufacturers (Canon Inc., Eastman Kodak Company, FUJIFILM Corporation, Panasonic Corporation and Sony Corporation) created this standard to make it easier to print images from a digital camera.

If your digital camera supports DPOF printing, you will be able to choose on the digital camera display the images and number of copies you want to print.

The following DPOF settings are available.

•	1 in 1 printing
•	Copies

Page Top