When setting certain menu selections, such as the Station ID, you will need to type text characters. The dial pad keys have letters printed on them. The keys:
0,
# and
![Bsymbol.tone](../img/bsymbol_tone.gif)
do
not have printed letters because they are used for special characters.
Press the appropriate dial pad key the number of times shown in this reference table to access the character you want.
Press Key | one time | two times | three times | four times | five times | six times | seven times | eight times | nine times |
1 | @ | . | / | 1 | @ | . | / | 1 | @ |
2 | a | b | c | A | B | C | 2 | a | b |
3 | d | e | f | D | E | F | 3 | d | e |
4 | g | h | i | G | H | I | 4 | g | h |
5 | j | k | l | J | K | L | 5 | j | k |
6 | m | n | o | M | N | O | 6 | m | n |
7 | p | q | r | s | P | Q | R | S | 7 |
8 | t | u | v | T | U | V | 8 | t | u |
9 | w | x | y | z | W | X | Y | Z | 9 |
For menu selections that do not allow lower case character selection, please use this reference table.
Press Key | one time | two times | three times | four times | five times |
2 | A | B | C | 2 | A |
3 | D | E | F | 3 | D |
4 | G | H | I | 4 | G |
5 | J | K | L | 5 | J |
6 | M | N | O | 6 | M |
7 | P | Q | R | S | 7 |
8 | T | U | V | 8 | T |
9 | W | X | Y | Z | 9 |
Inserting spaces
To enter a space in a fax number, press
![Bsymbol.rtri](../img/bsymbol_rtri.gif)
once between numbers. To enter a space in a name, press
![Bsymbol.rtri](../img/bsymbol_rtri.gif)
twice between characters.
Making corrections
If you entered a letter incorrectly and want to change it, press
![Bsymbol.ltri](../img/bsymbol_ltri.gif)
to move the cursor to the incorrect character, and then press
Clear/Back.
Repeating letters
To enter a character on the same key as the previous character, press
![Bsymbol.rtri](../img/bsymbol_rtri.gif)
to move the cursor right before pressing the key again.
Special characters and symbols
Press
![Bsymbol.tone](../img/bsymbol_tone.gif)
,
# or
0, then press
![Bsymbol.ltri](../img/bsymbol_ltri.gif)
or
![Bsymbol.rtri](../img/bsymbol_rtri.gif)
to move the cursor to the symbol or character you want. Press
OK to choose it. The symbols and characters below will appear depending on your menu selection.
Press ![Bsymbol.tone](../img/bsymbol_tone.gif) | for | (space) ! " # $ % & ’ ( ) ![Bsymbol.tone](../img/bsymbol_tone.gif) + , - . / ![Bsymbol.euro](../img/bsymbol_euro.gif) |
Press # | for | : ; < = > ? @ [ ] ^ _ \ ~ ` │ { } |
Press 0 | for | Ä Ë Ö Ü À Ç È É 0 |