Using the BR-Script3 Driver(PostScript®3™ language emulation printer driver)

Using the BR-Script3 Driver
(PostScript^® 3™ language emulation printer driver)

Note

•	To use the BR-Script3 printer driver, you need to set the Emulation to BR-Script 3 by using the control panel before connecting the interface cable. (See Printer Emulation Support.)
•	The BR-Script3 printer driver does not support the PC-Fax Sending.
•	For network users, see the Network User’s Guide for installation steps.

You need to install the BR-Script3 printer driver using the following instructions.

Note

If you use a USB cable and Mac OS, only one printer driver for a machine can be registered in the Printer Setup Utility (Mac OS X 10.3.9 to 10.4.x) or Print & Fax in System Preferences (Mac OS X 10.5.x). If a Brother Laser driver is already listed in the Printer list, you will need to remove it and then install the BR-Script3 printer driver. For the information about removing the printer driver, see Removing the Printer driver for Macintosh.

•

(Mac OS X 10.3.9 to 10.4.x)

Choose Applications from the Go menu.

Open the Utilities folder.

Open the Printer Setup Utility icon.

Click Add.

(Mac OS X 10.3.9) Go to step 5.

(Mac OS X 10.4.x) Go to step 6.

Choose USB.

Choose the printer name and make sure that Brother is shown in Printer Model (Print Using). Select the printer name that shows BR-Script in the Model Name (Model), and then click Add.

(Mac OS X 10.3.9)