Home PrintPrevious Next

Scan to OCR

When you choose Scan to OCR, your document will be scanned and sent directly to the PC you designated on your network. ControlCenter3 will activate ScanSoft™ PaperPort™ 11SE OCR and convert your document into text for viewing and editing from a word processing application on the designated PC. You can change the Scan configuration. (See OCR (Word Processing program).)
1
Load your document.
2
Press Graphic (Scan).
3
Press Bsymbol.utri or Bsymbol.dtri to choose Scan to PC.
Press OK.
4
Press Bsymbol.utri or Bsymbol.dtri to choose OCR.
Press OK.
If your machine does not support Duplex Scan, go to step 6.
If your machine supports Duplex Scan, go to step 5.
5
Press Bsymbol.utri or Bsymbol.dtri to choose 1sided, 2sided (L)edge or 2sided (S)edge.
Press OK.
6
Press Bsymbol.utri or Bsymbol.dtri to choose the destination PC you want to send to.
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination PC on the control panel.
Press OK.
7
Press Start.
The machine starts the scanning process.
Note Note
If you want the scanned data in color, choose color in scan type on the Device Button tab of the ControlCenter3 configuration. If you want the scanned data in black and white, choose black and white in scan type on the Device Button tab of the ControlCenter3 configuration. (See SCAN.)
Page Top
Home PrintPrevious Next