Using the Scan key

Note

•

If you want to scan a document using the duplex scanning feature, you need to put the document in the ADF and then choose 2sided (L)edge or 2sided (S)edge depending on your document layout.

•

Choose your document layout from following table:

Portrait		Landscape		LCD Message
Front	Back	Front	Back
				(L)edge (Long edge)
Front	Back	Front	Back
				(S)edge (Short edge)

Document Layout Table

•

Duplex scan is not supported by the DCP-8080DN and MFC-8480DN.

•

Duplex scan is available from the ADF only.

•

Duplex scan is not available for legal size paper.

•

The XPS file format is available for Windows Vista^® or when using applications which support XML Paper Specification files.

Scan to E-mail (PC)

When you choose Scan to E-mail (PC) your document will be scanned and sent directly to the PC you designated on your network. ControlCenter3 will activate the default E-mail application on the designated PC. You can scan and send a black and white or color document from the PC as an attachment.

You can change the scan configuration. (See E-mail.)

Load your document.

Press

(Scan).

Press

to choose Scan to PC.

Press OK.

Press

to choose E-mail.

Press OK.

If your machine does not support Duplex Scan, go to step 6.

If your machine supports Duplex Scan, go to step 5.

Press

to choose 1sided, 2sided (L)edge or 2sided (S)edge.

Press OK.

Press

to choose the destination PC you want to use for E-mailing your document.

Press OK.

If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination PC on the control panel.

Press OK.

Press Start.

The machine starts the scanning process.

Note

If you want to change the default file size, choose your preferred rate by moving the scroll bar on the Device Button tab of the ControlCenter3 configuration.

Page Top