Home PrintPrevious Next

Scan to File

When you choose Scan to File, you can scan a black and white or colour document and send it directly to a PC you designate on your network. The file will be saved in the folder and file format that you have configured in ControlCenter3. You can change the Scan configuration. (See File.)
1
Load your document.
2
Press Graphic (Scan).
3
Press Bsymbol.utri or Bsymbol.dtri to choose Scan to PC.
Press OK.
4
Press Bsymbol.utri or Bsymbol.dtri to choose File.
Press OK.
If your machine does not support Duplex Scan, go to step 6.
If your machine supports Duplex Scan, go to step 5.
5
Press Bsymbol.utri or Bsymbol.dtri to choose 1sided, 2sided (L)edge or 2sided (S)edge.
Press OK.
6
Press Bsymbol.utri or Bsymbol.dtri to choose the destination PC you want to send to.
Press OK.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination PC on the control panel.
Press OK.
7
Press Start.
The machine starts the scanning process.
Note Note
•
If you want the scanned data in colour, choose colour in scan type on the Device Button tab of the ControlCenter3 configuration. If you want the scanned data in black and white, choose black and white in scan type on the Device Button tab of the ControlCenter3 configuration. (See SCAN.)
•
If you would like to change the file name of scanned documents, enter the file name in the File Name section on the Device Button tab of the ControlCenter3 configuration. To change the machine’s Scan key settings, right-click each ControlCenter button, click ControlCenter Configuration and click the Device Button tab.
•
If you want to change the default file size, choose your preferred rate by moving the scroll bar on the Device Button tab of the ControlCenter3 configuration.
Page Top
Home PrintPrevious Next