When you choose Scan to E-mail (PC) your document will be scanned and sent directly to the PC you designated on your network. ControlCenter3 will activate the default E-mail application on the designated PC. You can scan and send a black and white or colour document from the PC as an attachment.
You can change the scan configuration. (See
E-mail.)
1 | Load your document. |
2 | Press ( Scan). |
3 | Press or to choose Scan to PC. Press OK. |
4 | Press or to choose E-mail. Press OK. If your machine does not support Duplex Scan, go to step 6. If your machine supports Duplex Scan, go to step 5. |
5 | Press or to choose 1sided, 2sided (L)edge or 2sided (S)edge. Press OK. |
6 | Press or to choose the destination PC you want to use for E-mailing your document. Press OK. If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination PC on the control panel. Press OK. |
7 | Press Start. The machine starts the scanning process. Note • | If you want the scanned data in colour, choose colour in scan type on the Device Button tab of the ControlCenter3 configuration. If you want the scanned data in black and white, choose black and white in scan type on the Device Button tab of the ControlCenter3 configuration. (See SCAN.) | • | If you want to change the default file size, choose your preferred rate by moving the scroll bar on the Device Button tab of the ControlCenter3 configuration. |
|