1 | Load your document. |
2 | Press (Scan). |
3 | Press or to choose Scan to PC. Press OK. |
4 | Press or to choose File. Press OK. If your machine does not support Duplex Scan, go to step 6. If your machine supports Duplex Scan, go to step 5. |
5 | Press or to choose 1sided, 2sided (L)edge or 2sided (S)edge. Press OK. |
6 | Press or to choose the destination Macintosh you want to send to. Press OK. If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination Macintosh on the control panel. Press OK. |
7 | Press Start. The machine starts the scanning process. |
• | If you want the scanned data in colour, choose colour in the scan type on the Device Button tab of the ControlCenter2 configuration. If you want the scanned data in black and white, choose black and white in the scan type on the Device Button tab of the ControlCenter2 configuration. (See File.) |
• | If you would like to change the file name of scanned documents, enter the file name in the File Name section on the Device Button tab of the ControlCenter2 configuration. |
• | If you want to change the default file size, choose your preferred rate by moving the slide bar on the Device Button tab of the ControlCenter2 configuration. |