When you choose Scan to E-mail (Macintosh), your document will be scanned and sent directly to the Macintosh you designated on your network. ControlCenter2 will activate the default E-mail application on the designated Macintosh for addressing to the recipient. You can scan a black and white or colour document and it will be sent with the E-mail from the Macintosh as an attachment.
You can change the scan configuration. (See
E-mail.)
1 | Load your document. |
2 | Press ( Scan). |
3 | Press or to choose Scan to PC. Press OK. |
4 | Press or to choose E-mail. Press OK. If your machine does not support Duplex Scan, go to step 6. If your machine supports Duplex Scan, go to step 5. |
5 | Press or to choose 1sided, 2sided (L)edge or 2sided (S)edge. Press OK. |
6 | Press or to choose the destination Macintosh you want to use for E-mailing your document. Press OK. If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination Macintosh on the control panel. Press OK. |
7 | Press Start. The machine will start the scanning process. Note • | If you want the scanned data in colour, choose colour in the scan type on the Device Button tab of the ControlCenter2 configuration. If you want the scanned data in black and white, choose black and white in the scan type on the Device Button tab of the ControlCenter2 configuration. (See File.) | • | If you want to change the default file size, choose your preferred rate by moving the scroll bar on the Device Button tab of the ControlCenter2 configuration. |
|