Step by step chart for wireless network configuration

Confirm your network environment. See Confirm your network environment.

•	Infrastructure mode Connected to a computer with an access point

•	Ad-hoc mode See For Ad-hoc mode Connected to a wireless capable computer without an access point

Confirm your wireless network setup method. See Confirm your wireless network setup method.

Using the Setup Wizard from the control panel (Recommended)	Using the SES/WPS/AOSS™ control panel menu (Automatic Wireless mode)	Using the PIN Method of Wi-Fi Protected Setup		Using the Brother installer application

			Temporarily using a network cable		Using the SES/WPS/AOSS™ control panel menu (Automatic Wireless mode)

Configure your machine for a wireless network. See Configure your machine for a wireless network.

See Using the Setup Wizard from the control panel	See Using the SES/WPS or AOSS™ control panel menu to configure your machine for a wireless network (Automatic Wireless mode)	See Using the PIN Method of Wi-Fi Protected Setup	(Windows^®) See Configuration in Infrastructure mode (Macintosh) See Configuration in Infrastructure mode	(Windows^®) See Configuration using the SES/WPS or AOSS™ from the control panel menu (Automatic Wireless mode) (Macintosh) See Configuration using the SES/WPS or AOSS™ from the control panel menu (Automatic Wireless mode)

Installing drivers and software (See the Quick Setup Guide)

Wireless configuration and installing drivers and software have been completed.