Receiving faxes into memory

This feature is only available for monochrome faxes.

As soon as the paper tray becomes empty during fax reception, the LCD shows No Paper Fed; put some paper in the paper tray. (See Loading paper and other media.) If you are unable to put paper in the paper tray the following will happen:

If Memory Receive is On:

The machine will carry on receving the fax, with the remaining pages being stored in memory, if enough memory is available. Further incoming faxes will also be stored into memory until the memory is full. When the memory is full the machine will stop automatically answering calls. To print the faxes, put fresh paper in the tray.

Page Top

If Memory Receive is Off:

The machine will carry on receiving the fax, with the remaining pages being stored in memory if enough memory is available. The machine will then stop automatically answering calls until fresh paper is put in the paper tray. To print the last fax you received, put fresh paper in the tray.

1	Press Menu.
2	Press or to choose Fax. Press OK.
3	Press or to choose Setup Receive. Press OK.
4	Press or to choose Memory Receive. Press OK.
5	Press or to choose On (or Off). Press OK.
6	Press Stop/Exit.

Page Top