Loading paper, envelopes and other media

Note

To print on Photo 10×15 cm or Photo L paper, you must use the photo paper tray. (See Loading photo paper.)

If the paper support flap is open, close it, and then pull the paper tray completely out of the machine.

Lift the output paper tray cover (1).

Press and slide the paper side guides (1) and paper length guide (2) to fit the paper size.

Fan the stack of paper well to avoid paper jams and misfeeds.

Note

Always make sure that the paper is not curled.

Gently put the paper into the paper tray print side down and top edge first.

Check that the paper is flat in the tray.

Note

When you use Legal size paper, press and hold the universal guide release button as you slide out the front of the paper tray.

Gently adjust the paper side guides with both hands and the paper length guide to the paper.

Make sure the paper side guides touch the sides of the paper.

Note

Be careful that you do not push the paper in too far; it may lift at the back of the tray and cause feed problems.

Close the output paper tray cover.

Slowly push the paper tray completely into the machine.

While holding the paper tray in place, pull out the paper support (1) until it clicks and unfold the paper support flap (2).

Note

Do not use the paper support flap for Legal paper.