PhotoCapture Center™ print settings

You can change the print settings temporarily for the next printing.

The machine returns to its default settings 180 seconds, or if the Mode Timer returns the machine to Fax mode. (See Mode Timer.)

Note

You can save the print settings you use most often by setting them as default. (See Setting your changes as a new default.)

1.	No of prints (For View Photo(s)) You can see the total number of photos that will be printed. (For Print All Photos, Print Photos) You can see the number of copies of each photo that will be printed.

Menu Selections	Option 1	Option 2	Page
Print Quality	Normal/Photo	—	Print Quality
Paper Type	Plain Paper/Inkjet Paper/ Brother Photo/Other Photo	—	Paper Type
Paper Size	Letter/A4/10x15cm/13x18cm	(When A4 or Letter is chosen)10x8cm/13x9cm/ 15x10cm/18x13cm/ 20x15cm/Max. Size	Paper and print size
Brightness		—	Brightness
Contrast		—	Contrast
Color Enhance	On/Off White Balance / Sharpness / Color Density Exit	—	Colour Enhancement
Cropping	On/Off	—	Cropping
Borderless	On/Off	—	Borderless printing
Set New Default	Yes/No	—	Setting your changes as a new default
Factory Reset	Yes/No	—	Restoring all the settings to factory settings

1	Press or to choose Print Quality. Press OK.
2	Press or to choose Normal or Photo. Press OK.
3	If you do not want to change additional settings, press Colour Start to print.