Broadcasting is when the same fax message is automatically sent to more than one fax number. You can include Groups, Speed Dial numbers and up to 50 manually dialled numbers in the same broadcast.
After the broadcast is finished, a Broadcast Report will be printed.
| 1 | Make sure you are in Fax mode  . |
| 2 | Load your document. |
| 3 | Enter a number. Press OK. You can use either a Speed Dial, a Group or a manually entered number using the dial pad. |
| 4 | Repeat 3 until you have entered all the fax numbers to be included in the broadcast. |
| 5 | Press Mono Start. |
Note
| • | If you did not use up any of the numbers for Groups, you can ‘broadcast’ faxes to as many as 90 different numbers. |
| • | The available memory will vary depending on the types of jobs in the memory and the number of locations used for broadcasting. If you broadcast to the maximum numbers available, you will not be able to use dual access. |
| • | If the memory is full, press Stop/Exit to stop the job. If more than one page has been scanned, press Mono Start to send the portion that is in the memory. |
Cancelling a Broadcast in progress
| 1 | Press Menu, 2, 4. The LCD will show the fax number being dialled. XXXXXXXX  |
|
| 2 | Press OK. The LCD will show the job number: 1.Clear 2.Exit |
|
| 3 | Press 1 to cancel. The LCD will then show the Broadcast job number and 1.Clear 2.Exit. |
| 4 | To cancel the Broadcast, press 1. |
| 5 | Press Stop/Exit. |
