You can use the scanner glass to fax pages of a book one at a time. The documents can be up to Letter or A4 size.
You cannot send colour faxes with multiple pages.

Note
| (MFC-290C and MFC-297C only) Since you can only scan one page at a time, it is easier to use the ADF if you are sending a multiple page document. |
1 | Make sure you are in Fax mode  . |
2 | Load your document face down on the scanner glass. |
3 | Enter the fax number using the dial pad, Speed Dial or Search. |
4 | Press Mono Start or Colour Start. • | If you press Mono Start, the machine starts scanning the first page. Go to step 5. | • | If you press Colour Start, the machine starts sending the document. |
|
5 | Do one of the following: • | To send a single page, press 2 to choose No (or press Mono Start again). The machine starts sending the document. | • | To send more than one page, press 1 to choose Yes and go to step 6. |
|
6 | Place the next page on the scanner glass. Press OK. The machine starts scanning the page. (Repeat steps 5 and 6 for each additional page.) |