When you choose Scan to File, you can scan a black and white or colour document and send it directly to the Macintosh
® you designate on your network. The file will be saved in the folder and file format that you have configured in ControlCenter2 on the designated Macintosh
®. You can change the
Scan configuration. (See
File.)
| 1 | Load your document. |
| 2 | Press the  ( Scan) key. |
| 3 | Press  or  to choose Scan to File. Press OK. |
| 4 | Press or to choose the destination Macintosh ® you want to send to. Press OK. If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination Macintosh® on the control panel. Press OK.  Note | | For DCP models, press or repeatedly to enter the first digit of the PIN number. Press  to move the cursor, then use or to enter the second digit. Repeat until you have entered all four digit of the PIN number. Press OK. |
|
| 5 | Press Mono Start or Colour Start. The machine starts the scanning process. Note | • | If you want to change between colour and black and white scanning, choose colour or black and white in the scan type option on the Device Button tab of the ControlCenter2 configuration screen. (See SCAN.) | | • | If you would like to change the file name of scanned documents, enter the file name in the File Name section on the Device Button tab of the ControlCenter2 configuration. | | • | Scan type depends on the settings of the Device Button tab, Mono Start or Colour Start do not change the settings. |
|
