When you choose Scan to OCR, your document will be scanned and sent directly to the Macintosh
® you designated on your network. ControlCenter2 will activate the OCR software installed on your Macintosh
® (Presto!
® PageManager
®) and convert your document into text for viewing and editing from a word processing application on the designated Macintosh
®. You can change the
Scan configuration. (See
OCR (word processing application).)
| 1 | Load your document. |
| 2 | Press the  ( Scan) key. |
| 3 | Press  or  to choose Scan to OCR. Press OK. |
| 4 | Press or to choose the destination Macintosh ® you want to send to. Press OK. If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the destination Macintosh® on the control panel. Press OK.  Note | | For DCP models, press or repeatedly to enter the first digit of the PIN number. Press  to move the cursor, then use or to enter the second digit. Repeat until you have entered all four digit of the PIN number. Press OK. |
|
| 5 | Press Mono Start or Colour Start. The machine starts the scanning process. |
Note
| • | Presto!® PageManager® must be installed on your Macintosh®. |
| • | You can’t choose colour Scan type for this function. Mono Start or Colour Start do not change the settings. |
