Search

Site Map

Home > Paper Handling > Load Paper > Paper Settings > Change the Check Paper Setting

Change the Check Paper Setting

If this setting is set to [On] and the paper tray is removed, the LCD displays a message asking if you want to change the Paper Size and Paper Type settings.

The default setting is [On].

MFC-J1010DW/MFC-J1012DW

  1. Press Settings.
  2. Press image or image to make your selections:
    1. Select [General Setup]. Press OK.
    2. Select [Check Paper]. Press OK.
    3. Select [On] or [Off]. Press OK.
  3. Press Stop/Exit.

MFC-J1170DW

  1. Press image[Settings]>[All Settings]>[General Setup].
  2. Press image or image to display the [Check Paper] option, and then press it.
  3. Press [On] or [Off].
  4. Press image.
Related Information
Did you find the information you needed?

find moreaccept