Home > Network > Additional Methods of Configuring Your Brother Machine for a Wireless Network > Configure Your Machine for an Enterprise Wireless Network
Configure Your Machine for an Enterprise Wireless Network
HL-L3290CDW/DCP-L3551CDW
Before configuring your machine, we recommend writing down your wireless network settings. You will need this information before you continue with the configuration.
- Check and record the current wireless network settings.
Network Name (SSID) Communication Mode Authentication Method Encryption Mode User ID Password Infrastructure LEAP CKIP EAP-FAST/NONE AES TKIP EAP-FAST/MS-CHAPv2 AES TKIP EAP-FAST/GTC AES TKIP PEAP/MS-CHAPv2 AES TKIP PEAP/GTC AES TKIP EAP-TTLS/CHAP AES TKIP EAP-TTLS/MS-CHAP AES TKIP EAP-TTLS/MS-CHAPv2 AES TKIP EAP-TTLS/PAP AES TKIP EAP-TLS AES - TKIP - For example:
Network Name (SSID) HELLO Communication Mode Authentication Method Encryption Mode User ID Password Infrastructure EAP-FAST/MS-CHAPv2 AES Brother 12345678 
If you configure your machine using EAP-TLS authentication, you must install the client certificate issued by a CA before you start configuration. Contact your network administrator about the client certificate. If you have installed more than one certificate, we recommend writing down the certificate name you want to use.
If you verify your machine using the common name of the server certificate, we recommend writing down the common name before you start configuration. Contact your network administrator about the common name of the server certificate.
- Press Menu.
- Press
or 
to select the following: - Select [Network]. Press OK.
- Select [WLAN]. Press OK.
- Select [Setup Wizard]. Press OK.
- When [WLAN Enable?] appears, enable the wireless network.This will start the wireless setup wizard.
- The machine will search for your network and display a list of available SSIDs. Press or to select the [<New SSID>] option, and then press OK.
- Enter the SSID name, and then press OK.
- Select the [Infrastructure] option, and then press OK.
- Press or to select the Authentication Method you want, and then press OK.
- Do one of the following:
If you selected the [LEAP] option, enter the user ID, and then press OK.
Enter the Password, and then press OK.
If you selected the [EAP-FAST], [PEAP] or [EAP-TTLS] option, press
or to select the Inner Authentication Method [NONE], [CHAP], [MS-CHAP], [MS-CHAPv2], [GTC] or [PAP], and then press OK. Depending on your Authentication Method, the Inner Authentication Method selections differ.Press
or to select the Encryption Type [TKIP+AES] or [AES], and then press OK. Press
or to select the Verification Method [No Verification], [CA] or [CA+Server ID], and then press OK. - If you selected the [CA+Server ID] option, enter the server ID, user ID and password (if required), and then press OK for each option.
- For other selections, enter the user ID and the Password, and then press OK for each option.
If you have not imported a CA certificate into your machine, the machine will display the message [No Verification].If you selected the [EAP-TLS] option, press
or to select the Encryption Type [TKIP+AES] or [AES], and then press OK. When the machine displays a list of available Client Certificates, select the certificate you want.
Press
or to select the Verification Method [No Verification], [CA] or [CA+Server ID], and then press OK. - If you selected the [CA+Server ID] option, enter the server ID and user ID, and then press OK for each option.
- For other selections, enter the user ID, and then press OK.
- To apply the settings, select [Yes]. To cancel, select [No].
- The machine will attempt to connect to the wireless device you have selected.
You have completed the wireless network setup. To install Full Driver & Software Package necessary for operating your device, insert the Brother installation disc into your computer or go to your model's Downloads page on the Brother Solutions Center at support.brother.com.
MFC-L3710CW/MFC-L3750CDW/MFC-L3770CDW
Before configuring your machine, we recommend writing down your wireless network settings. You will need this information before you continue with the configuration.
- Check and record the current wireless network settings.
Network Name (SSID) Communication Mode Authentication Method Encryption Mode User ID Password Infrastructure LEAP CKIP EAP-FAST/NONE AES TKIP EAP-FAST/MS-CHAPv2 AES TKIP EAP-FAST/GTC AES TKIP PEAP/MS-CHAPv2 AES TKIP PEAP/GTC AES TKIP EAP-TTLS/CHAP AES TKIP EAP-TTLS/MS-CHAP AES TKIP EAP-TTLS/MS-CHAPv2 AES TKIP EAP-TTLS/PAP AES TKIP EAP-TLS AES - TKIP - For example:
Network Name (SSID) HELLO Communication Mode Authentication Method Encryption Mode User ID Password Infrastructure EAP-FAST/MS-CHAPv2 AES Brother 12345678 If you configure your machine using EAP-TLS authentication, you must install the client certificate issued by a CA before you start configuration. Contact your network administrator about the client certificate. If you have installed more than one certificate, we recommend writing down the certificate name you want to use.
If you verify your machine using the common name of the server certificate, we recommend writing down the common name before you start configuration. Contact your network administrator about the common name of the server certificate.
- Press
. - When [Enable WLAN?] appears, press [Yes].This will start the wireless setup wizard. To cancel, press [No].
- The machine will search for your network and display a list of available SSIDs. Swipe up or down or press or to display [<New SSID>]. Press [<New SSID>], and then press [OK].
- Enter the SSID name, and then press [OK].
- Press [Infrastructure] when instructed.
- Select the Authentication Method.
- Do one of the following:
If you selected the [LEAP] option, enter the user ID, and then press [OK]. Enter the Password, and then press [OK].
- If you selected the [EAP-FAST], [PEAP] or [EAP-TTLS] option, select the Inner Authentication method [NONE], [CHAP], [MS-CHAP], [MS-CHAPv2], [GTC] or [PAP].
Depending on your Authentication method, the Inner Authentication method selections differ.
Select the encryption type [TKIP+AES] or [AES].
Select the verification method [No Verification], [CA] or [CA + Server ID].
- If you selected the [CA + Server ID] option, enter the server ID, user ID and password (if required), and then press [OK] for each option.
- For other selections, enter the user ID and Password, and then press [OK] for each option.
If you have not imported a CA certificate into your machine, the machine displays [No Verification]. If you selected the [EAP-TLS] option, select the encryption type [TKIP+AES] or [AES].
The machine will display a list of available Client Certificates, and then select the certificate.
Select the verification method [No Verification], [CA] or [CA + Server ID].
- If you selected the [CA + Server ID] option, enter the server ID and user ID, and then press [OK] for each option.
- For other selections, enter the user ID, and then press [OK].
- The machine attempts to connect to the wireless device you have selected.
You have completed the wireless network setup. To install Full Driver & Software Package necessary for operating your device, insert the Brother installation disc into your computer or go to your model's Downloads page on the Brother Solutions Center at support.brother.com.