Date & Time

-

Access the Date and Time setting menus.

Toner

Toner Life

-

View the approximate remaining toner life for each color.

Test Print

-

Print a test page.

Calibration

Calibrate

Initiate color calibration to check and correct colors.

Reset

Reset the calibration parameters to the default settings.

Registration

-

Align the print position of each color.

Network

Wired LAN

(MFC-L3750CDW/MFC-L3770CDW)

-

Access the Wired LAN setting menus.

WLAN

-

Access the WLAN setting menus.

Screen Settings

-

-

Access the default screen setting menus.

Eco Mode

-

-

Turn on the following machine settings at the same time.

• 2-sided Print: Long Edge (Available only for certain models)
• Sleep Time: 0Min
• Dim Timer: 10Secs

Tray Setting

-

-

Access the tray setting menus.

All Settings

-

-

Configure the detailed settings.

Tray Setting

Paper Type

MP Tray (MFC-L3770CDW)

Select the paper type that matches the paper in the MP tray.

Tray #1 (MFC-L3770CDW)

Select the paper type that matches the paper in the standard paper tray.

Paper Size

MP Tray (MFC-L3770CDW)

Select the size of paper you loaded in the MP tray.

Tray #1 (MFC-L3770CDW)

Select the size of paper you loaded in the standard paper tray.

Check Size

-

Select whether to display a message telling you to check that the size and type of the paper in the machine and the machine's Paper Size and Paper Type settings match.

Tray Use: Copy

-

Select the tray to be used for Copy.

Tray Use: Fax

-

Select the tray to be used for Fax.

Tray Use: Print

-

Select the tray to be used for Print.

Volume

Ring

-

Adjust the ring volume.

Beep

-

Adjust the beeper volume.

Speaker

-

Adjust the speaker volume.

LCD Settings

Backlight

-

Adjust the brightness of the LCD backlight.

Dim Timer

-

Set how long the LCD backlight stays on after you go back to your Main Home screen.

Screen Settings

Main Home Screen

-

Set the Main Home screen.

Copy Screen

-

Set the default Copy screen.

Scan Screen

-

Set the default Scan screen.

Notifications

Scan Result(Skip Blank Page)

-

Displays the total scanned pages and skipped blank pages after scanning is completed.

Ecology

Eco Mode

-

Turn on the following machine settings at the same time.

• 2-sided Print: Long Edge (Available only for certain models)
• Sleep Time: 0Min
• Dim Timer: 10Secs

Toner Save

-

Increase the page yield of the toner cartridge.

Sleep Time

-

Set how much time will pass before the machine enters Power Saving mode.

Quiet Mode

-

Decrease printing noise.

Auto Power Off

-

Set the number of hours that the machine will remain in Deep Sleep mode before going into Power Off mode.

Setting Lock

Set Password

-

Restrict unauthorized users from changing the machine’s settings.

Lock Off⇒On

-

New Password

(Available only when you enter the password for the first time.)

-

Delete Storage

Macro ID

-

Delete the registered Macro data.

Font ID

-

Delete the registered Font data.

Format

-

Restore the Macro and Font data of your machine to the default settings.

(Select a Shortcut)

Rename

Change the shortcut name.

Edit

Change the shortcut settings.

Delete

Delete the shortcut.

Setup Receive

Receive Mode

-

Select the Receive Mode that best suits your needs.

Ring Delay

-

Set the number of rings before the machine answers in Fax or Fax/Tel mode.

F/T Ring Time

-

Set the length of the pseudo/double-ring time in Fax/Tel mode.

Fax Preview

-

View received faxes on the LCD.

Easy Receive

-

Receive fax messages automatically when you answer a call and hear fax tones.

Remote Codes

Remote Codes

Answer calls at an extension or external telephone and use codes to turn on or off the Remote Codes. You can personalize the codes.

Fax Receive Code

Tel Answer

Auto Reduction

-

Reduce the size of incoming faxes.

PC Fax Receive

On

Set the machine to send faxes to your computer.

You can turn on the Backup Print safety feature.

Off

Memory Receive

Off

-

Fax Forward

Set the machine to forward fax messages or to store incoming faxes in the memory (so you can retrieve them while you are away from your machine).

If you select Fax Forward or Fax Storage, you can turn on the Backup Print safety feature.

Fax Storage

Forward to Cloud

Forward incoming faxes to the online service.

Fax Rx Stamp

-

Print the received time and date on the top of received faxes.

2-sided

-

Print received faxes on both sides of the paper.

Setup Send

Batch TX

-

Combine delayed faxes to the same fax number at the same time of day into one transmission.

Coverpage Message

-

Set up one or two custom cover page messages to print on outgoing faxes.

Auto Redial

-

Set the machine to redial the last fax number after five minutes, if the fax did not go through because the line was busy.

Destination

-

Set the machine to display the destination information on the LCD during fax dialing.

Report Setting

Transmission

-

Select the initial setup for the Transmission Verification Report.

Journal Period

Journal Period

Set the interval for automatic printing of the Fax Journal.

Time

If you select an option other than Off and Every 50 Faxes, you can set the time for the option.

Day

If you select Every 7 Days, you can set the day of the week.

Print Fax

-

-

Print received faxes stored in the machine's memory.

Remote Access

-

-

Set your own code for Remote Retrieval.

Dial Restriction

Dial Pad

-

Set the machine to restrict dialing when using the dial pad.

Address Book

-

Set the machine to restrict the dialing when using the Address Book.

Shortcuts

-

Set the machine to restrict the dialing when using a Shortcut.

Remaining Jobs

-

-

Check which scheduled jobs are in the machine's memory and cancel selected jobs.

Miscellaneous

Distinctive

Distinctive

Turn on the telephone company's Distinctive Ring subscriber service to register your new ring pattern on the machine.

Ring Pattern

Register your new ring pattern on the machine.

Emulation

-

-

Select the emulation mode.

Quality

-

-

Select the print quality.

Print Options

Font List

HP LaserJet

Print a list of the machine’s internal fonts.

BR-Script 3

Test Print

-

Print a test page.

2-sided

2-sided Print

-

Enable or disable 2-sided printing and choose long edge or short edge.

Single Image

-

For a print job where the last page is a 1-sided image, select the 1-sided Feed option to reduce printing time.

When you use preprinted paper, you must select the 2-sided Feed option. If you select 1-sided Feed for preprinted paper, the last page will be printed on the reverse side.

Auto Continue

-

-

Select if you want the machine to clear paper size errors or media type errors automatically, and use paper from other trays.

Output Color

-

-

Set the output color.

HP Tray Command

-

-

Select the correct version of HP LaserJet tray emulation.

Reset Printer

-

-

Restore the printer settings to the factory settings.

Color Correction

Calibration

Calibrate

Initiate color calibration to check and correct colors.

Reset

Reset the calibration parameters to the default settings.

Registration

-

Align the print position of each color.

Auto Correction

-

Set the machine to perform Color Calibration and Registration automatically.

Color Settings

Setting Mode

Select whether to apply the color print settings of the machine or the printer driver.

Color Mode

Select the color mode.

Improve Gray Color

Turn on or off to improve the image quality of shaded areas.

Enhance Black Printing

Turn on or off if a black graphic does not print correctly.

Brightness

Adjust the brightness.

Contrast

Adjust the contrast.

Red

Adjust the red color.

Green

Adjust the green color.

Blue

Adjust the blue color.

Wired LAN

(MFC-L3750CDW/MFC-L3770CDW)

TCP/IP

BOOT Method

IP Boot Tries

Select the Boot method that best suits your needs.

IP Address

-

Enter the IP address.

Subnet Mask

-

Enter the Subnet mask.

Gateway

-

Enter the Gateway address.

Node Name

-

Enter the Node name.

(up to 32 characters)

WINS Configuration

-

Select the WINS configuration mode.

WINS Server

Primary

Specify the IP address of the primary WINS server.

Secondary

Specify the IP address of the secondary WINS server.

DNS Server

Primary

Specify the IP address of the primary DNS server.

Secondary

Specify the IP address of the secondary DNS server.

APIPA

-

Set the machine to allocate the IP address from the link-local address range automatically.

IPv6

-

Turn the IPv6 protocol on or off.

Ethernet

-

-

Select the Ethernet link mode.

Wired Status

-

-

View the current wired status.

MAC Address

-

-

View the machine's MAC address.

Set to Default

(MFC-L3750CDW/MFC-L3770CDW)

-

-

Restore the wired network settings to the factory settings.

Wired Enable

(MFC-L3750CDW/MFC-L3770CDW)

-

-

Turn the Wired LAN interface on or off manually.

WLAN

TCP/IP

BOOT Method

IP Boot Tries

Select the Boot method that best suits your needs.

IP Address

-

Enter the IP address.

Subnet Mask

-

Enter the Subnet mask.

Gateway

-

Enter the Gateway address.

Node Name

-

Enter the Node name.

(up to 32 characters)

WINS Configuration

-

Select the WINS configuration mode.

WINS Server

Primary

Specify the IP address of the primary WINS server.

Secondary

Specify the IP address of the secondary WINS server.

DNS Server

Primary

Specify the IP address of the primary DNS server.

Secondary

Specify the IP address of the secondary DNS server.

APIPA

-

Set the machine to allocate the IP address from the link-local address range automatically.

IPv6

-

Turn the IPv6 protocol on or off.

Setup Wizard

-

-

Configure the wireless network settings using the setup wizard.

WLAN Assistant

-

-

Configure your wireless network settings using the Brother installation disc.

WPS

-

-

Configure your wireless network settings using the one-button push method.

WPS w/ PIN Code

-

-

Configure your wireless network settings using WPS with a PIN.

WLAN Status

Status

-

View the current wireless network status.

Signal

-

View the current wireless network signal strength.

SSID

-

View the current SSID.

Comm. Mode

-

View the current Communication mode.

MAC Address

-

-

View the machine's MAC address.

Set to Default

(MFC-L3750CDW/MFC-L3770CDW)

-

-

Restore the wireless network settings to the factory settings.

WLAN Enable

-

-

Turns the wireless interface on or off.

Wi-Fi Direct

Push Button

-

-

Configure your Wi-Fi Direct network settings using the one-button push method.

PIN Code

-

-

Configure your Wi-Fi Direct network settings using WPS with a PIN code.

Manual

-

-

Configure your Wi-Fi Direct network settings manually.

Group Owner

-

-

Set your machine as the Group Owner.

Device Information

Device Name

-

View your machine's device name.

SSID

-

View the Group Owner's SSID.

When the machine is not connected, the LCD displays Not Connected.

IP Address

-

View your machine's current IP Address.

Status Information

Status

-

View the current Wi-Fi Direct network status.

Signal

-

View the current Wi-Fi Direct network signal strength.

When your machine acts as Group Owner, the LCD always indicates a strong signal.

I/F Enable

-

-

Turn the Wi-Fi Direct connection on or off.

NFC

-

-

-

Turn the NFC function on or off.

Web Connect Settings

Proxy Settings

Proxy Connection

-

Change the Web connection settings.

Address

-

Port

-

User Name

-

Password

-

Network Reset

-

-

-

Restore all network settings back to the factory settings.

Transmission

View on LCD

Display Transmission Verification Reports about sent faxes.

Print Report

Print a Transmission Verification Report of your last transmission.

Address Book

-

Print a list of names and numbers stored in the Address Book.

Fax Journal

-

Print a list of information about your last 200 incoming and outgoing faxes.

(TX means Transmit. RX means Receive.)

User Settings

-

Print a list of your settings.

Printer Settings

-

Print a list of your Printer settings.

Network Configuration

-

Print a list of your Network settings.

Print File List

-

Print a list of data saved in the machine's memory.

Drum Dot Print

-

Print the Drum Dot Check Sheet.

WLAN Report

-

Print the wireless LAN connection results.

Serial No.

-

-

Check your machine's serial number.

Firmware Version

Main Version

-

Check your machine's firmware version.

Sub1 Version

-

Firmware Update

-

-

Update your machine to the latest firmware.

Firmware Auto Check

-

-

View firmware information on the Main Home screen.

Page Counter

Total

Color

Check the total number of pages the machine has printed.

Black and White

Fax

-

Copy

Color

Black and White

Print

Color

Black and White

Other

Color

Black and White

Parts Life  *1

Drum

Black(BK)

Display the remaining life of each drum unit.

Cyan(C)

Magenta(M)

Yellow(Y)

Belt

-

Display the remaining life of the belt unit.

Fuser

-

Display the remaining life of the fuser unit.

PF Kit MP

(MFC-L3770CDW)

-

Display the remaining life of the PF kit MP.

PF Kit 1

-

Display the remaining life of the PF Kit 1.

Date & Time

Date

Add the date and time on the screen and in the headings of the faxes you send.

Time

Clock Type

Select the time format (12-hour or 24-hour).

Auto Daylight

Set the machine to change automatically for Daylight Saving Time.

Time Zone

Set your time zone.

Station ID

Fax

Enter your name and fax number so it appears on each page you fax.

Tel

Name

Tone/Pulse

(Available only for some countries)

-

Select the dialing mode.

Dial Tone

-

Shorten the dial tone detect pause.

Dial Prefix

-

Set a prefix number to be added before the fax number every time you dial.

Compatibility

-

Adjust the equalization for transmission difficulties.

VoIP service providers offer fax support using various standards. If you regularly experience fax transmission errors, select Basic (for VoIP).

Reset

Machine Reset

Restore the machine settings that you have changed.

Network Reset

Restore all network settings back to the factory settings.

Address Book & Fax

Erase all stored phone numbers and fax settings.

All Settings

Restore all the machine's settings back to the factory settings and delete the personal data in the memory. You cannot see the data on the machine.

Factory Reset

Restore all the machine settings back to the factory settings and delete the personal data in the machine's memory. We recommend using this menu option if you want to delete all the data from the machine.

Local Language

(Available only for some countries)

-

Change your LCD language.