Home > Routine Maintenance > Pack and Ship Your Brother Machine
Pack and Ship Your Brother Machine
- WARNING
-
To prevent possible injuries, at least two people should lift the product by holding it at the front and back.
When you move the machine, carry the machine as shown in the illustration.
- If for any reason you must ship your machine, carefully repack the machine in the original packaging to avoid any damage during transit. The machine should be adequately insured with the carrier.
- Unless you are returning the machine as part of the Brother Exchange Service, leave the toner cartridge and drum unit inside the machine when you pack and ship it.
- Press and hold
to turn off the machine. Leave the machine off for at least 10 minutes to cool down. - Disconnect all the cables, and then unplug the power cord from the AC power outlet.
- Put the machine into the bag it originally came in.
- Pack the machine, the printed materials, and the AC power cord (if applicable) in the original carton with the original packing material as shown. If you are returning your machine to Brother as part of the Exchange Service, pack only the machine. Keep all separate parts and printed materials to use with your "Exchange" machine.
- Close the carton and tape it shut.
Did you find the information you needed?