Search

Site Map

Home > Paper Handling > Load Paper > Paper Settings > Change the Check Paper Setting

Change the Check Paper Setting

If this setting is set to [On] and the paper tray is removed or you load paper in the MP tray, the LCD displays a message allowing you to change the Paper Size and Paper Type settings.

The default setting is [On].

DCP-T530DW/DCP-T535DW/DCP-T536DW/DCP-T580DW/DCP-T583DW/DCP-T730DW/DCP-T735DW/DCP-T830DW/DCP-T835DW

  1. Press Menu.
  2. Press image or image to make your selections:
    1. Select [General Setup]. Press OK.
    2. (DCP-T830DW/DCP-T835DW) Select [Tray Setting]. Press OK.
    3. Select [Check Paper]. Press OK.
    4. Select [On] (or [Off]). Press OK.
  3. Press Stop/Exit.

DCP-T780DW/MFC-T930DW/MFC-T935DW/MFC-T980DW

  1. Press Settings.
  2. Press image or image to make your selections:
    1. Select [General Setup]. Press OK.
    2. (MFC-T930DW/MFC-T935DW/MFC-T980DW) Select [Tray Setting]. Press OK.
    3. Select [Check Paper]. Press OK.
    4. Select [On] or [Off]. Press OK.
  3. Press Stop/Exit.
Related Information
Did you find the information you needed?

find moreaccept