Home > Network > Wireless Network Settings > Use the Wireless Network > Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi Protected Setup™ (WPS)
Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi Protected Setup™ (WPS)
If your wireless access point/router supports WPS (Push Button Configuration), you can use WPS from your machine's control panel to configure your wireless network settings.
DCP-T530DW/DCP-T535DW/DCP-T536DW/DCP-T580DW/DCP-T583DW/DCP-T730DW/DCP-T735DW/DCP-T830DW/DCP-T835DW
- Press Wi-Fi.
- Press
or 
to select [WPS/PushButton]. Press OK. - When the [WLAN Enable?] message appears, press to select [On]. This starts the wireless setup wizard. To cancel, press.
- When the LCD instructs you to start WPS, press the WPS button on your wireless access point/router. Then press. Your machine automatically tries to connect to your wireless network.
If your wireless device is connected successfully, the machine's LCD displays [Connected].
You have completed the wireless network setup. To install the drivers and software necessary to use your machine, go to your model's Downloads page at support.brother.com/downloads.
DCP-T780DW/MFC-T930DW/MFC-T935DW/MFC-T980DW
- Press Wi-Fi.
- Press or to select the [WPS/Push Button] option, and then press OK.
- When [Enable WLAN?] appears, press
. The wireless setup wizard starts. To cancel, press
. - When the LCD instructs you to start WPS, press the WPS button on your wireless access point/router. Then press on your machine. Your machine automatically tries to connect to your wireless network.
When your wireless device connects successfully, the machine displays [Connected].
You have completed the wireless network setup. To install the drivers and software necessary to use your machine, go to your model's Downloads page at support.brother.com/downloads.
Did you find the information you needed?