Search

Site Map

Home > Routine Maintenance > Correct the Paper Feed to Clear Vertical Lines

Correct the Paper Feed to Clear Vertical Lines

Adjust the paper feed to reduce vertical lines.

DCP-T530DW/DCP-T535DW/DCP-T536DW/DCP-T730DW/DCP-T735DW/DCP-T830DW/DCP-T835DW

  1. Press Menú (Menu).
  2. Press image or image to make your selections:
    1. Select [Maintenance]. Press OK.
    2. Select [ImproveQuality]. Press OK.
    3. Select [Correct Feed]. Press OK.
  3. Select the paper size you want to adjust. Press OK.
  4. Select the paper type you want to adjust. (Supported models only) Press OK.
  5. Load specified size paper in the tray, and then press Inicio Negro (Black Start) or Inicio Color (Color Start).
    The machine prints the check sheet and the positioning guide.
  6. Follow the positioning guide and the LCD instructions to complete the adjustment.
  7. Press Detener/Salir (Stop/Exit).

MFC-T930DW/MFC-T935DW

Before adjusting the print alignment, complete a print quality check first by pressing image (Ink), image or image to select [Impr. PrintQuality]>[Impr. PrintQuality] again, and then OK.
  1. Press image (Ink).
  2. Press image or image to make your selections:
    1. Select [Impr. PrintQuality]. Press OK.
    2. Select [Correct Paper Feed]. Press OK.
  3. Press image after a confirmation message if a print quality check has been completed appears on the LCD.
  4. Select the paper size you want to adjust.
  5. Select the paper type you want to adjust. (Supported models only)
  6. Follow the LCD instruction to load paper in the tray, and then press image.
    The machine prints the check sheet.
  7. Follow the LCD instructions to complete the adjustment.
  8. Press Detener/Salir (Stop/Exit).
Related Information
Did you find the information you needed?

find moreaccept