• Turn the machine on by pressing .

• Turn the machine off by pressing and holding . The LCD displays [Shutting Down] and stays on for a few seconds before turning off.

Displays messages to help you set up and use the machine.

a. Type of copy

b. Number of copies

c. Quality

d. Contrast

e. Copy ratio

• Press to stop an operation.
• Press to exit from a menu.

• 启动黑白

  • Press to start making copies in monochrome.
  • Press to start scanning documents (in colour, grey, or monochrome depending on the scan setting).
• 启动彩色

  • Press to start making copies in full colour.
  • Press to start scanning documents (in colour, grey, or monochrome depending on the scan setting).

You can select from two types of screens to set as the Main Home screen: Home screens and Shortcuts screens. When a Home screen is displayed, swipe left or right or press or to display the other Home screens.

The Main Home screen displays the machine's status when the machine is idle. When displayed, this screen indicates that your machine is ready for the next command.

If Active Directory Authentication or LDAP Authentication is enabled, the machine's control panel is locked.

The available features vary depending on your model.

The Home screens provide access to features, such as Fax, Copy, and Scan.

Home screen: Screen 1

Home screen: Screen 2

Home screen: Screen 3

Shortcuts screen

Create Shortcuts for frequently-used operations, such as sending a fax, making a copy, and scanning.

Eight Shortcuts tabs are available with six Shortcuts on each Shortcuts tab. A total of 48 Shortcuts are available.

1. Date & Time

   Displays the date and time set on the machine.

2. Function Icons

   • [Fax] (For MFC Models)

     Press to access Fax mode.

   • [Copy]

     Press to access Copy mode.

   • [Scan]

     Press to access Scan mode.

   • [Secure Print]

     Press to access the [Secure Print] option.

   • [Apps]

     Press to connect your machine to the Brother Apps service.

   • [USB] (MFC-L3768CDW)

     Press to access the USB menu and select [Scan to USB] or [Direct Print] options.

   • [2 in 1 ID Copy]

     Press to access the 2 in 1 ID Copy option.

3. (Toner)

   Displays the remaining toner life. Press to access the [Toner] menu.

4. (Settings)

   Press to access the [Settings] menu.

   

   If Setting Lock has been turned on, a lock icon appears on the LCD. You must unlock the machine to change settings.

   

   • Toner

     • Displays the remaining toner life.
     • Press to access the [Toner] menu.

   • / Network

     • Press to set up a network connection.
     • A four level indicator on the screen displays the current wireless signal strength if you are using a wireless connection.

   • Fax Preview (For MFC Models)

     Press to access the [Fax Preview] menu.

   • Wi-Fi Direct (For DCP Models)

     Press to access the [Wi-Fi Direct] menu.

   • Tray Setting

     Press to access the [Tray Setting] menu.

   • Eco Mode

     Press to access the [Eco Mode] menu.

   • All Settings

     Press to access a menu of all machine settings.

   • Date & Time

     • Displays the date and time set on the machine.

     • Press to access the [Date & Time] menu.

5. IP Address

   If the IP Address setting in the [Display Information] menu has been turned on, your machine's [IP Address] appears on the Home screens.

6. or (Wireless Status)

   Press to configure wireless settings.

   If you are using a wireless connection, a four-level indicator displays the current wireless signal strength.

   	Wireless LAN Disabled

7. (Fax mode setting)

   Press to change the Fax receive mode.

   

   The machine will transfer the received fax data to the designated computer and the fax data will not remain in your machine in the PC-Fax mode. Machine will print received faxes if you turn on the backup print setting.

   To change the backup print setting, press [Settings]>[All Settings]>[Fax]>[Setup Receive]>[Receive Mode]>[PC Fax Receive]

8. [Shortcuts]

   Press to access the [Shortcuts] screen.

9. (Home screen)

   Press to access the Home screens.

• New Fax (For MFC Models)

  

  When [Fax Preview] is set to [On], the number of new faxes you received into the memory appears at the top of the screen.

• Warning icon

  

  The warning icon appears when there is an error or maintenance message. Press the message area to view it, and then press to return to the Main Home screen.

The LED lights up depending on the machine’s power status.

• Turn the machine on by pressing .
• Turn the machine off by pressing and holding down . The LCD displays [Shutting Down] for a few seconds before the machine turns off. If you have an external telephone or TAD connected, it is always available.