Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Set Auto Power Off Mode
Set Auto Power Off Mode
If the machine does not receive any jobs for a certain length of time, based on your model and settings, the machine will automatically enter Power Off mode. The machine will not go into Power Off mode if it is connected to a network, a USB cable, NFC, Wi-Fi Direct, or a telephone line, or if there is any secure print data stored in its memory. The available features and interfaces vary depending on the model.
- To start printing, press on the control panel and then send a print job.
HL-L2465DW/DCP-L2640DW/DCP-L2647DW/MFC-L2760DW
- Press Menu.
- Press or to display the [General Setup] option, and then press OK.
- Press or to display the [Ecology] option, and then press OK.
- Press or to display the [Auto Power Off] option, and then press OK.
- Press or to display the [8 hours], [4 hours], [2 hours], [1 hour], [20 Mins], or [Off] option, and then press OK.
- Press Stop/Exit.
HL-L2480DW/MFC-L2807DW/MFC-L2820DW/MFC-L2820DWXL/MFC-L2900DW/MFC-L2900DWXL/MFC-L2980DW
- Press .
- Press or to display the [Off], [20 Mins], [1 hour], [2 hours], [4 hours] or [8 hours] option, and then press the option you want.
- Press .
Did you find the information you needed?