Home > Routine Maintenance > Replace Supplies > Reset the Drum Counter
Reset the Drum Counter
When you replace the drum unit with a new one, you must reset the drum counter by completing the following steps:
- IMPORTANT
- DO NOT reset the drum counter unless you are replacing the drum unit.
DCP-B7548W/DCP-B7558W/DCP-B7578DW/DCP-B7608W/DCP-B7628DW/DCP-B7638DN/DCP-B7648DW
- Make sure the machine is turned on.
- Make sure the machine's cover is closed.
- Press OK and at the same time.
- Press OK to select [Drum].
- Press to reset the drum counter.
DCP-B7658DW
- Make sure the machine is turned on.
- Close the front cover of the machine.
- Press to clear the error.
- Press (Toner) until the touchscreen message changes.
- Press [Drum].
- Press [Yes].
Did you find the information you needed?