The machine loads paper from the installed standard paper tray, optional lower tray or multi-purpose tray.
Standard paper tray
Since the standard paper tray is a universal type, you can use any of the paper sizes (one paper type and size at a time) listed in the table in
Paper capacity of the paper trays. The standard paper tray can hold up to 250 sheets of Letter/A4 size paper (80 g/m
2). Paper can be loaded up to the maximum paper mark on the sliding paper width guide.
Multi-purpose tray (MP tray)
The MP tray can hold up to 50 sheets of plain paper (60 to 163 g/m2) or up to 3 envelopes. Paper can be loaded up to the maximum paper mark on the sliding paper width guide.
Optional lower tray (LT-5300)
The optional lower tray can hold up to 250 sheets of Letter/A4 size paper (80 g/m2). Paper can be loaded up to the top line of the maximum paper mark on the sliding paper width guide.
The name for the paper trays in the printer driver in this Guide are as follows:
Tray and optional unit | Name |
Standard paper tray | Tray 1 |
Optional lower tray | Tray 2 |
Multi-purpose tray | MP tray |
Paper capacity of the paper trays
| Paper size | Paper types | No. of sheets |
Paper Tray (Tray #1) | A4, Letter, Executive, A5, A5 (Long Edge), A6, B5 and B6 . | Plain paper, Thin paper and Recycled paper | up to 250
[80 g/m2] |
| | | Transparency | up to 10 |
Multi-purpose tray (MP tray) | Width: 69.8 to 216 mm Length: 116 to 406.4 mm | Plain paper, Thin paper, Thick paper, Bond paper, Recycled paper, Envelopes and Labels . | up to 50 [80 g/m2] up to 3 (envelopes) |
| | | Transparency | up to 10 |
Paper Tray (Tray #2) | A4, Letter, Executive, A5, B5 and B6 . | Plain paper, Thin paper and Recycled paper | up to 250
[80 g/m2] |
Recommended paper specifications
The following paper specifications are suitable for this machine.
Basis weight | 75-90 g/m2 |
Thickness | 80-110 µm |
Roughness | Higher than 20 sec. |
Stiffness | 90-150 cm3/100 |
Grain direction | Long grain |
Volume resistivity | 10e9-10e11 ohm |
Surface resistivity | 10e9-10e12 ohm-cm |
Filler | CaCO3 (Neutral) |
Ash content | Below 23 wt% |
Brightness | Higher than 80% |
Opacity | Higher than 85% |
