Scan to File

You can scan a black and white or a colour document into your PC and save it as a file in a folder of your choice. The file type and specific folder are based on the settings you have chosen in the Scan to File screen of ControlCenter3. (See File.)

1	Load your document.
2	Press (Scan).
3	Press or to choose Scan to PC. Press OK.
4	Press or to choose File. Press OK. If your machine does not support Duplex Scan, go to step 6. If your machine supports Duplex Scan, go to step 5.
5	Press or to choose 1sided, 2sided (L)edge or 2sided (S)edge. Press OK.
6	Press Start. The machine starts the scanning process.

Note

•	If you want the scanned data in colour, choose colour in scan type on the Device Button tab of the ControlCenter3 configuration. If you want the scanned data in black and white, choose black and white in scan type on the Device Button tab of the ControlCenter3 configuration. (See SCAN.)
•	If you would like to display the folder window after scanning the document, select Show Folder on the Device Button tab of the ControlCenter3 configuration. (See SCAN.)
•	If you would like to change the file name of scanned documents, enter the file name in File Name section on the Device Button tab of the ControlCenter3 configuration. To change the machine’s Scan key settings, right-click the each ControlCenter buttons, click ControlCenter Configuration and click the Device Button tab.
•	If you want to change the default file size for JPEG, PDF or Secure PDF, choose your preferred rate by moving the scroll bar on the Device Button tab of the ControlCenter3 configuration.

Page Top