Search

Site Map

Home > Paper Handling > Load Paper > Paper Settings > Change the Check Paper Setting

Change the Check Paper Setting

If this setting is set to [On] and the paper tray is removed or you load paper in the MP Tray, the LCD displays a message asking if you want to change the Paper Size and Paper Type settings.

The default setting is [On].

DCP-T520W/DCP-T525W/DCP-T720DW/DCP-T725DW/DCP-T820DW/DCP-T825DW

  1. Press Menú (Menu).
  2. Press image or image to make your selections:
    1. Select [General Setup]. Press OK.
    2. (DCP-T820DW/DCP-T825DW) Select [Tray Setting]. Press OK.
    3. Select [Check Paper]. Press OK.
    4. Select [On] (or [Off]). Press OK.
  3. Press Detener/Salir (Stop/Exit).

MFC-T920DW/MFC-T925DW

  1. Press Ajustes (Settings).
  2. Press image or image to make your selections:
    1. Select [General Setup]. Press OK.
    2. Select [Tray Setting]. Press OK.
    3. Select [Check Paper]. Press OK.
    4. Select [On] or [Off]. Press OK.
  3. Press Detener/Salir (Stop/Exit).
Related Information
Did you find the information you needed?

find moreaccept