Search

Home > Network > Wireless Network Settings > Use the Wireless Network > Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi Protected Setup (WPS)

Configure Your Machine for a Wireless Network Using the One Push Method of Wi-Fi Protected Setup (WPS)

If your wireless access point/router supports WPS (Push Button Configuration), you can use WPS from your machine's control panel menu to configure your wireless network settings.

DCP-T520W/DCP-T525W/DCP-T720DW/DCP-T725DW/DCP-T820DW/DCP-T825DW

  1. Press WiFi.
  2. Press image or image to select [WPS/PushButton]. Press OK.
  3. When the [WLAN Enable?] message appears, press image to select [On].
    This starts the wireless setup wizard. To cancel, press image.
  4. When the LCD instructs you to start WPS, press the WPS button on your wireless access point/router. Then press image. Your machine automatically tries to connect to your wireless network.
If your wireless device is connected successfully, the machine's LCD displays [Connected].

You have completed the wireless network setup. To install the drivers and software necessary to use your machine, go to your model's Downloads page at support.brother.com.

(Windows) Or, use the Brother installation disc to set up your machine (not available in all countries).

MFC-T920DW/MFC-T925DW

  1. Press image.
  2. Press image or image to select the [WPS/Push Button] option, and then press OK.
  3. When [Enable WLAN?] appears, press image.
    The wireless setup wizard starts. To cancel, press image.
  4. When the LCD instructs you to start WPS, press the WPS button on your wireless access point/router. Then press image on your machine. Your machine automatically tries to connect to your wireless network.
If your wireless device is connected successfully, the machine's LCD displays [Connection successful.].

You have completed the wireless network setup. To install the drivers and software necessary to use your machine, go to your model's Downloads page at support.brother.com.

(Windows) Or, use the Brother installation disc to set up your machine (not available in all countries).

Did you find the information you needed?