Search

Home > Network > Network Features > Reset the Network Settings to Factory Default

Reset the Network Settings to Factory Default

You can use your machine's control panel to reset the print server to its default factory settings. This resets all information, such as the password and IP address.
image
  • This feature restores all wired (supported models only) and wireless network settings to the factory settings.

  • You can also reset the print server to its factory settings using Web Based Management.

DCP-T520W/DCP-T525W/DCP-T720DW/DCP-T725DW/DCP-T820DW/DCP-T825DW

  1. Press Menú (Menu).
  2. Press image or image to select the following:
    1. Select [Initial Setup]. Press OK.
    2. Select [Reset]. Press OK.
    3. Select [Network Reset]. Press OK.
  3. Press image for [Reset] to confirm.
  4. Press image for [Yes] to reboot the machine.
    The machine restarts.

MFC-T920DW/MFC-T925DW

  1. Press Ajustes (Settings).
  2. Press image or image to make your selections:
    1. Select [Network]. Press OK.
    2. Select [Network Reset]. Press OK.
  3. Press image for two seconds to confirm.
    The machine restarts.
Did you find the information you needed?