Scan to Media

You can scan black and white and color documents directly to a memory card or USB Flash memory drive. Black and white documents will be stored in the PDF (*.PDF) or TIFF file formats (*.TIF). Color documents may be stored in PDF (*.PDF) or JPEG (*.JPG) file formats. File names are based on the current date. For example, the fifth image scanned on July 1, 2009 would be named 07010905.PDF. You can change the color, quality and file name.

Note

DCP models cannot change the file name.

Resolution	File Format Options	Default File Format (1 line LCD models)	Default File Format (Color LCD models and Touchscreen models)
B/W 200x100 dpi	TIFF / PDF	TIFF	PDF
B/W 200 dpi	TIFF / PDF	TIFF	PDF
Color 150 dpi	JPEG / PDF	PDF	PDF
Color 300 dpi	JPEG / PDF	PDF	PDF
Color 600 dpi	JPEG / PDF	PDF	PDF

Auto Crop (For DCP-395CN, MFC-495CW and MFC-795CW)

Note

Auto Crop feature is supported by technology from Reallusion, Inc.

You can scan multiple documents placed on the scanner glass. An individual document can be previewed on the LCD before you save it. When you choose Auto Crop, the machine will scan each document and create separate files. For example, if you place three documents on the scanner glass, the machine will scan and create three separate files. If you want to create a three page file, choose TIFF or PDF for File Type.

1.	0.4 in. (10 mm) or greater
2.	0.8 in. (20 mm) or greater (bottom)

Guidelines for Auto Crop

•	This setting is only available for paper that is rectangular or square.
•	If your document is too long or wide, this setting does not work properly.
•	You must place the documents away from the edges of the scanner glass as shown in the illustration.
•	You must place the documents at least 0.4 in. (10 mm) apart from each other.
•	Auto Crop adjusts the skew of the document on the scanner glass, but if your document is skewed more than 10 degrees, this setting will not work.
•	The ADF must be empty to use the Auto Crop.
•	The Auto Crop feature is available for up to a maximum of 16 documents depending on size of your documents.

Put a memory card or USB Flash memory drive into your machine.

Note

•	DCP-375CW and MFC-255CW do not support using a USB Flash memory drive.
•	DCP-375CW, MFC-255CW and MFC-295CN do not support using a CompactFlash^®.

CAUTION

DO NOT take out the memory card or USB Flash memory drive while Photo Capture is blinking to avoid damaging the card, USB Flash memory drive or the data stored on them.

If you take out the memory card or USB Flash memory drive while the Photo Capture key is flashing, you must restart your computer at once before putting the same memory card or USB Flash memory drive into the machine. If you do not restart your computer, the data on your media may be destroyed.

Load your document.

Press

(Scan).

Press

to choose Scan to Media.

Press OK.

Do one of the following:

•	If you want to change the quality, go to step 5.
•	Press Black Start or Color Start to start scanning without changing additional settings. Go to step 8.

(For 1 line LCD models) Press

to choose the quality you want.

Press OK.

(For Color LCD models) Press

to choose Quality.

Press

to choose the quality you want.

Press OK.

Do one of the following:

•	If you want to change the file type, go to step 6.
•	Press Black Start or Color Start to start scanning without changing additional settings. Go to step 8.

(For 1 line LCD models) Press

to choose the file type you want.

Press OK.

(For Color LCD models) Press

to choose File Type.

Press

to choose the file type you want.

Press OK.

Do one of the following:

•	If you want to change the file name, go to step 7.
•	Press Black Start or Color Start to start scanning without changing additional settings. Go to step 8.

Note

•	If you choose color in the quality setting, you cannot choose TIFF.
•	If you choose black and white in the quality setting, you cannot choose JPEG.

The file name is set automatically. However, you can set a name of your choice using the dial pad. You can only change the first 6 digits of the file name. (MFC models only)

(For Color LCD models)

Press

to choose File Name.

Press OK.

Note

Press Clear/Back to delete the letters you entered.

Do one of the following:

•	If you want to use Auto Crop feature, go to step 9 (Available on DCP-395CN and MFC-495CW).
•	Press Black Start or Color Start to start scanning without changing additional settings. Go to step 8.

If you are using the scanner glass, the LCD displays Next Page?. After you finish scanning, make sure you choose No before removing the memory card or USB Flash memory drive from the machine.

Press

to choose Auto Crop.

Press OK.

Press

to choose On.

Press OK.

If you do not want to change additional settings, press Black Start or Color Start to start scanning.

The number of the scanned documents appear on the LCD.

Press OK.

Press

to preview each document data.

Press OK to save the data.

Press Stop/Exit.

Note

Scan type depends on the settings you choose in step 5 to 6, Black Start or Color Start does not change the setting.

For Touchscreen models

Put a memory card or USB Flash memory drive into your machine.

CAUTION

DO NOT take out the memory card or USB Flash memory drive while Photo Capture is blinking to avoid damaging the card, USB Flash memory drive or the data stored on them.

Load your document.

Press

(Scan).

Press Scan to Media.

Do one of the following:

•	If you want to change the quality, go to step 5.
•	Press Black Start or Color Start to start scanning without changing additional settings. Go to step 8.

Press Quality and then press the quality you want.

Do one of the following:

•	If you want to change the file type, go to step 6.
•	Press Black Start or Color Start to start scanning without changing additional settings. Go to step 8.

Press File Type and then press the file type you want.

Do one of the following:

•	If you want to change the file name, go to step 7.
•	Press Black Start or Color Start to start scanning without changing additional settings. Go to step 8.

Note

•	If you choose color in the quality setting, you cannot choose TIFF.
•	If you choose black and white in the quality setting, you cannot choose JPEG.

The file name is set automatically. However, you can create a name of your choice using the character keys on the control panel. Press File Name and then enter the file name. You can only change the first 6 digits of the file name.

Press OK.

Note

Press

to delete the letters you entered. For details on entering text, see the User's Guide included with your machine.

Do one of the following:

•	If you want to use Auto Crop feature, go to step 9.
•	Press Black Start or Color Start to start scanning without changing additional settings. Go to step 8.

If you are using the scanner glass, the LCD displays Next Page?. After you finish scanning, make sure you choose No before removing the memory card or USB Flash memory drive from the machine.

Press

to display Auto Crop. Press Auto Crop.

Press On.

If you do not want to change additional settings, press Black Start or Color Start to start scanning.

The number of the scanned documents appear on the LCD.

Press OK.

Press

to preview each document data.

Press Save All to save the data.

Note

Scan type depends on the settings you choose in step 5 and 6, Black Start or Color Start do not change the setting.

Page Top