Loading documents
You can make copies and scan from the ADF (automatic document feeder) (DCP-185C only) and from the scanner glass.
Using the ADF
(DCP-185C only)
The ADF can hold up to 15 pages and feeds each sheet individually. Use standard 80 g/m
2
paper and always fan the pages before putting them in the ADF.
Recommended environment
Temperature:
20 to 30° C
Humidity:
50% to 70%
Paper:
80 g/m
2
Page Top
Document Sizes Supported
Length:
148 to 355.6 mm
Width:
148 to 215.9 mm
Weight:
64 to 90 g/m
2
Page Top
How to load documents
CAUTION
DO NOT pull on the document while it is feeding.
DO NOT use paper that is curled, wrinkled, folded, ripped, stapled, paper clipped, pasted or taped.
DO NOT use cardboard, newspaper or fabric.
•
Make sure documents written with ink are completely dry.
1
Unfold the ADF Document Output Support Flap
(1)
.
2
Fan the pages well. Make sure you put the documents
face down, top edge first
in the ADF until you feel them touch the feed roller.
3
Adjust the paper guides
(2)
to fit the width of your documents.
CAUTION
DO NOT leave thick documents on the scanner glass. If you do this, the ADF may jam.
Page Top
CAUTION
