Home > Routine Maintenance > Correct the Paper Feed to Clear Vertical Lines
Correct the Paper Feed to Clear Vertical Lines
Adjust the paper feed to reduce vertical lines.
DCP-J1050DW/MFC-J1010DW
Before adjusting the print alignment, complete a print quality check first by pressing 
(Ink) or INK on the control panel, 
or 
to select again, and then OK.
(Ink) or INK on the control panel, or to select again, and then OK. - Press (Ink) or INK on the control panel.
- Press or to make your selections:
- Select [Impr. PrintQuality]. Press OK.
- Select [Correct Paper Feed]. Press OK.
- Press
after a confirmation message if a print quality check has been completed appears on the LCD. - Select [Auto] or [Manual].
- If you select the [Auto] mode, the paper feed is automatically adjusted by scanning the check sheet.
- If you select the [Manual] mode, you need to input information printed on the check sheet manually.
- If you selected the [Auto] mode, select the paper size to print the check sheet on.
- Load specified size paper in the tray, and then press. The machine prints the check sheet.
- Follow the instructions on the LCD.
DCP-J1140DW
Before adjusting the paper feed, make a print quality check first by pressing 
.
- Press.
- Press [Next].
- Press [Yes] after a confirmation message if a print quality check has been completed appears on the LCD.
- Press [Auto] or [Manual].
- If you select the [Auto] mode, the paper feed is automatically adjusted by scanning the check sheet.
- If you select the [Manual] mode, you need to input information printed on the check sheet manually.
- If you selected the [Auto] mode, select the paper size to print the check sheet on.
- Load specified size paper in the tray, and then press [Start].The machine prints the check sheet.
- Follow the instructions on the LCD.
Did you find the information you needed?