Accueil > Sécurité du réseau > Utiliser l'authentification IEEE 802.1x pour votre réseau > Méthodes d’authentification IEEE 802.1x
Méthodes d’authentification IEEE 802.1x
- EAP-FAST
-
Le protocole EAP-FAST (Extensible Authentication Protocol-Flexible Authentication via Secured Tunneling) développé par Cisco Systems, Inc., utilise un nom d’utilisateur et un mot de passe pour l’authentification et des algorithmes à clé symétrique pour réaliser un processus d’authentification en tunneled.
Votre appareil Brother prend en charge les méthodes d’authentification interne suivantes :
- EAP-FAST/AUCUN
- EAP-FAST/MS-CHAPv2
- EAP-FAST/GTC
- EAP-MD5 (réseau câblé)
-
Le protocole EAP-MD5 (Extensible Authentication Protocol-Message Digest Algorithm 5) utilise un nom d’utilisateur et un mot de passe pour effectuer une authentification de type « challenge-response ».
- PEAP
- Le protocole PEAP (Protected Extensible Authentication Protocol) est une version de la méthode EAP développée par Cisco Systems, Inc., Microsoft Corporation et RSA Security. PEAP crée un tunnel SSL (Secure Sockets Layer)/TLS (Transport Layer Security) entre un client et un serveur d’authentification pour l’envoi d’un nom d’utilisateur et d’un mot de passe. PEAP assure une authentification mutuelle entre le serveur et le client.
Votre appareil Brother prend en charge les méthodes d’authentification interne suivantes :
- PEAP/MS-CHAPv2
- PEAP/GTC
- EAP-TTLS
-
Le protocole EAP-TTLS (Extensible Authentication Protocol-Tunneled Transport Layer Security) a été développé par Funk Software et Certicom. EAP-TTLS crée un tunnel crypté SSL, similaire à celui du protocole PEAP, entre un client et un serveur d’authentification pour l’envoi d’un nom d’utilisateur et d’un mot de passe. EAP-TTLS assure une authentification mutuelle entre le serveur et le client.
Votre appareil Brother prend en charge les méthodes d’authentification interne suivantes :
- EAP-TTLS/CHAP
- EAP-TTLS/MS-CHAP
- EAP-TTLS/MS-CHAPv2
- EAP-TTLS/PAP
- EAP-TLS
-
Le protocole EAP-TLS (Extensible Authentication Protocol-Transport Layer Security) nécessite l’authentification d’un certificat numérique par un client et par un serveur d’authentification.