Home > Security > Use Secure Function Lock 3.0 > Configure Secure Function Lock 3.0 Using Web Based Management
Configure Secure Function Lock 3.0 Using Web Based Management
- Start your web browser.
- Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).For example:
https://192.168.1.2
- If required, type the password in the Login field, and then click Login.The default password to manage this machine’s settings is located on the back of the machine and marked "Pwd".
- Go to the navigation menu, and then click Administrator > Restriction Management or User Restriction Function.Start from , if the navigation menu is not shown on the left side of the screen.
- Select Secure Function Lock.
- Click Submit.
- Click the Restricted Functions menu.
- In the User List / Restricted Functions field, type a group name or user name.
- In the Scan to columns, select a check box to allow, or clear a check box to restrict, the function listed.
- Click Submit.
- Click the User List menu.
- In the User List field, type the user name.
- In the PIN Number field, type a password.The number of characters you can set differs depending on the model.
- In the E-mail Address field, type the user's email address (available only for certain models).
- To register the user's Card ID, type the card number in the Card ID (NFC ID) field.
- Select User List / Restricted Functions from the drop-down list for each user.
- Select Home Screen from the drop-down list for each user.
- Click Submit.
Did you find the information you needed?