Search

Home > Scan > Scan Using the Scan Functions on Your Brother Machine > Web Services for Scanning on Your Network (Windows 7, Windows 8.1 and Windows 10) > Use Web Services to Install Drivers Used for Scanning (Windows 7, Windows 8.1 and Windows 10)

Use Web Services to Install Drivers Used for Scanning (Windows 7, Windows 8.1 and Windows 10)

Use Web Services to monitor scanners on the network.
  • Make sure you have installed the Brother software and drivers.
  • Verify that the host computer and the Brother machine are on the same subnet, or that the router is correctly configured to pass data between the two devices.
  • You must configure the IP address on your Brother machine before you configure this setting.
  1. Do one of the following:
    • Windows 10

      Click image>Windows System>Control Panel. In the Hardware and Sound group, click Add a device.

    • Windows 8.1

      Move your mouse to the lower-right corner of your desktop. When the menu bar appears, click Settings>Change PC settings>PC and devices>Devices>Add a device.

      The machine's Web Services Name appears.

    • Windows 7

      Click image(Start)>Control Panel>Network and Internet>View network computers and devices.

      The machine's Web Services Name appears with the scanner icon.

      Right-click the machine you want to install.

    image
    The Web Services Name for the Brother machine is your model name and the MAC Address (Ethernet Address) of your machine (for example, Brother XXX-XXXXX (model name) [XXXXXXXXXXXX] (MAC Address / Ethernet Address)).
  2. Do one of the following:
    • Windows 8.1/Windows 10

      Select the machine you want to install, and then follow the on-screen instructions.

    • Windows 7

      Click Install in the displayed menu.

    image
    To uninstall drivers, click Uninstall or image (Remove device).
Did you find the information you needed?