Home > Paper Handling > Load Documents > Load Non-standard Size Documents
Load Non-standard Size Documents
- Slide the Document Separation Switch to the left and confirm that it is set to (Manual Single Mode).When the machine is in Manual Single Mode, Multifeed Detection is not available.
- Fold your document in half, as shown.
- Gently adjust the Paper Guides (1) to fit the width of your document.
- Place your document, face down, top edge first in the ADF between the Paper Guides until you feel it touch the inside of the machine.
- IMPORTANT
- DO NOT slide the Document Separation Switch during scanning. Doing this may damage the machine.
- NOTE
-
When finished, slide the Document Separation Switch to the right and confirm that it is set to (Continuous Feed Mode).
Did you find the information you needed?