Search

Site Map

Home > Network > Network Features > Reset the Network Settings to Factory Default

Reset the Network Settings to Factory Default

You can use your machine's control panel or Web Based Management to reset the machine's network settings to its default factory settings. This resets all information, such as the password and IP address.
image

  • This feature restores all wired and wireless network (supported models only) settings to the factory settings.

  • (ADS-4300N) You can only reset the scan server to its factory settings using Web Based Management.

ADS-4300N

  1. Start your web browser.
  2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
    For example:

    https://192.168.1.2

  3. If required, type the password in the Login field, and then click Login.
    image
    The default password to manage this machine’s settings is located on the back of the machine and marked "Pwd".
  4. Go to the navigation menu, and then click Administrator>Reset Menu.
    image
    Start from image, if the navigation menu is not shown on the left side of the screen.
  5. Click Reset under Network.
    The reset confirmation message is displayed.
  6. Click Yes to restart your machine.

ADS-4700W/ADS-4900W

  1. Press image [Settings]>[Network]>[Network Reset].
    The reset confirmation message is displayed.
  2. Press [OK] for two seconds.
    The machine will restart.
Related Information
Did you find the information you needed?

find moreaccept